Description
Loose oxy-acetylene lines dragging across fabrication floors invite burn cuts from hot steel slag. Installing the Coxreels Hose Reel Dual Hose unit provides safe containment for 50 feet of factory-installed T-Grade twin hose. Rated at 200 PSI, it supports all industrial fuel gases. The spring motor requires hand-escorted retraction to prevent torch tip impact.
Fabricated from heavy-gauge carbon steel with robotic seam welds, the single pedestal base incorporates rolled stiffening ribs to resist deflection. Fluid distribution utilizes dual independent solid brass swivels fitted with fluoropolymer packings, meeting strict T-Grade standards for acetylene, propane, and natural gas without cross-port leakage. A 1-inch solid steel center shaft turns inside sealed precision radial ball bearings. Retraction power comes from an enclosed lubricated clock spring motor, providing consistent rewinding torque without binding.
Oxy-Fuel Hardware Performance Matrix Data
Field cutting operations require organized twin-line gas delivery to prevent dangerous gas mixtures. This spring-driven package isolates fuel streams and includes certified T-Grade hose.
- 200 PSI maximum operating pressure rating accommodates commercial oxygen, acetylene, and propane systems.
- 50-foot 1/4-inch T-Grade twin hose comes pre-installed to eliminate separate line procurement.
- Dual independent brass swivels with fluoropolymer seals eliminate cross-contamination between fuel and oxygen.
- Cartridge-style main spring motor delivers consistent rewinding tension across thousands of job cycles.
- Multi-position locking pawl mechanism holds required working line reach without ratchet slipping.
- 4-way roller guide assembly protects twin siamese hose covers from sharp bracket edge wear.
- Single pedestal steel arm adjusts to wall, floor, or overhead ceiling mounting configurations.
Gas Pressure Flow Bench Telemetry
Pneumatic pressure trials evaluate gas seal integrity and crossover resistance under working loads. Flowing 40 PSI fuel gas and 90 PSI oxygen through the dual swivels shows zero cross-port pressure leakage across four hours of static hold testing. Swivel housing temperatures match ambient room conditions throughout extended flow tests. Decibel measurements register 68 dBA at 3 feet during spring return. The main power spring delivers 24 inch-pounds of retraction force, drawing 50 feet of twin hose across concrete without line stall.
Field Service Maintenance Boundaries
Industrial fabrication shops subject cutting lines to hot sparks and dropped metal. Do not connect this reel to high-pressure air or hydraulic equipment exceeding 200 PSI, as brass swivels will fracture under shock pressure. Never lubricate brass oxygen swivels with petroleum-based grease.
- Perform soapy water leak checks on dual brass swivels every 30 days.
- Inspect twin hose jackets for burn marks before every work shift.
- Check base mounting bolt torque every 6 months to maintain structural stability.
Commercial Warranty Package Contents
Manufacturer terms provide a 2-Year limited warranty against structural metal fractures, drive spring breakage, and brass swivel leakage. The carton contains the assembled steel hose reel, factory-installed 50-foot 1/4-inch T-Grade twin hose, dual brass swivels, adjustable twin rubber hose stop, and technical safety instruction manuals.