Description
Drain muddy trenches, floodwater ponds, and construction excavations on remote jobsites. The Champion Power Equipment 3-Inch Gas-Powered Semi-Trash water transfer pump moves dirty water fast. A 224cc commercial gas engine drives a cast-iron semi-trash impeller. The semi-trash design passes small debris but jams on rocks exceeding 0.5-inch diameter.
Solid tubular steel creates the roll-cage chassis, finished with chip-resistant black powder paint. A 224cc Champion OHV gas engine provides shaft power through a cast-iron sleeve cylinder. The die-cast aluminum pump volute features an internal cast-iron impeller and silicon carbide mechanical seals. Folding transport handles and never-flat wheels speed transit over muddy jobsites. Standard 3-inch NPT ports connect discharge hoses.
Semi Trash System Specifications
Utility contractors remove dirty pond water containing light silt and debris without electrical generators. The complete kit includes all intake and discharge hoses required for immediate worksite operation.
- Commercial 224cc OHV gas engine delivers reliable starting torque across all work shifts
- Cast-iron semi-trash impeller handles suspended debris up to 0.5-inch diameter
- Die-cast aluminum casing cuts unit weight for fast jobsite transport and loading
- Complete hose kit includes 12-foot intake hose and 20-foot discharge line
- Folding steel handle and solid wheels permit fast cart movement across muddy terrain
- Silicon carbide mechanical shaft seal resists wear from abrasive sand particles
- Standard 3-inch NPT suction and discharge ports hook straight to commercial hoses
Dyno Bench Testing Data
Dynamometer bench testing confirms the 224cc engine maintains 3550 RPM under a 25-foot dynamic discharge head. Fluid flow stabilizes at 285 GPM through 20 feet of 3-inch lay-flat hose. Crankcase oil temperature reaches 182°F after 3 continuous hours of full-throttle operation. Fuel consumption measures 0.56 GPH. Sound telemetry indicates 86 dBA at 5 meters distance.
Operational Realities Job Demands
You guide this cart across construction sites using the fold-away handle. The wide solid wheels traverse deep gravel without sinking into loose soil. Do not start this engine without filling the pump housing with water first. Operating the pump dry melts the silicon carbide shaft seal within 60 seconds.
- Fill the pump priming port with clean water before pulling the starter cord
- Inspect the suction hose gasket for tight sealing to prevent vacuum air leaks
- Drain the pump casing plug before winter storage to prevent freeze cracking
Commercial Warranty Terms Manifest
Champion Power Equipment covers this pump with a 2-Year limited warranty and lifetime technical support. The package includes the pump, steel roll cage, wheel kit, 12-foot intake hose, 20-foot discharge hose, suction strainer, and fittings.
