Description
Electric spreaders struggle with heavy abrasive sand when narrow conveyor chains stretch and slip off worn drive teeth. The Buyers Products Company 4.0 Cubic Yard Electric Poly Hopper Spreader, Chain uses an extra-wide pintle chain to haul dense sand-salt mixtures without drive slipping. It holds 4.0 Cubic Yards of deicing material. Heavy loaded payloads require a minimum 17500-pound GVWR truck platform.
The double-wall hopper shell is molded from high-density virgin polyethylene to reject corrosive road salt and survive cold loader bucket impacts. A heavy pintle chain with welded steel cross slats rides across a replaceable 304 stainless steel bed plate. Independent 12 Volt DC high-torque electric motors drive the chain conveyor and spinner disc through sealed, oil-filled planetary reduction gearboxes.
Heavy Electric Chain Conveyor Matrix
Independent dual electric motors let drivers dump dense abrasive sand fast while maintaining a tight spinner throw pattern. The durable poly hopper drops into standard commercial dump beds or flatbed frames.
- 4.0 Cubic Yard capacity poly hopper carries up to 8000 pounds of bulk salt, coarse sand, or grit.
- High-torque 3/4 Horsepower conveyor gear motor drags the heavy pintle chain through packed material beds.
- Independent 1/2 Horsepower spinner motor spreads deicing media from 5 to 30 feet wide across roads.
- Heavy pintle chain conveyor delivers positive mechanical drag without slipping under dense wet sand loads.
- 14-inch heavy polymer spinner disc resists chemical rust and stone impacts across wide throw arcs.
- Integrated top steel screens filter out oversized chunks and frozen crusts during loader bucket fills.
- In-cab digital dual-variable controller provides independent dial adjustment of material feed and spread width.
Current Draw Motor Heat Telemetry
Dragging a full payload of abrasive sand draws 56 Amps from the truck 12 Volt electrical system at the conveyor motor. The independent spinner motor draws 25 Amps at 650 RPM. Conveyor gearbox surface temperature reaches 142°F after two hours of steady parking lot clearing. The in-cab digital controller operates 12°F above cabin ambient temperature.
Fleet Winter Bounds Maintenance Protocol
Commercial snow removal companies, highway maintenance crews, and industrial plant operators spread dense abrasive mixtures with this chain platform. Do not install this 4.0 Cubic Yard unit in 3/4-ton or 1-ton pickup trucks because loaded gross weights exceed vehicle ratings. Never allow damp sand and salt mixtures to sit inside the hopper during warm summer months.
- Check pintle chain tension every 30 days and adjust tensioner bolts to maintain proper bottom sag.
- Wash salt cake build-up from around the spinner motor and conveyor sprockets each morning after use.
- Inspect high-current 12 Volt electrical harness connections for corrosion and apply dielectric silicone.
Commercial Warranty Equipment Manifest Breakdown
Buyers Products Company protects this SaltDogg spreader with a 1-Year commercial warranty covering poly hopper integrity, drive motors, and electrical controls. The package arrives with the 4.0 Cubic Yard poly hopper, pintle chain drive, spinner chute, in-cab digital controller, wire harnesses, and top screens.