Description
Position EV battery packs with Bendpak EVS3000 3000 Lbs mobile scissor support when technicians need full-rise access without a fixed lift bay. Experienced EV service teams gain adjustable alignment during battery replacement, drivetrain work, and powertrain handling, but can a 3,000-lb assembly remain secure when anchoring and center of gravity change? Its steel platform, twin hydraulic cylinders, 12V battery system, screw jacks, recessed anchor points, and locking casters support controlled component positioning.
Model 5175611 provides a 42.75 by 63-inch lift platform, onboard 12V charging, remote operation, full-length utility trays, manual floor locks, and a hydraulic fail-safe circuit. The lift weighs 1,918 lbs. Battery charging from approximately 20 percent takes 10 to 12 hours, while lifting time is listed near 18 seconds. Adjustable screw jacks provide roll, pitch, and yaw alignment for EV batteries, engines, and drivetrain assemblies.
Features of Bendpak EVS3000
EV repair centers, fleet garages, battery-remanufacturing facilities, and multi-bay service departments need a mobile scissor lift table for heavy powertrain components. Trained technicians can use this Mobi-EVS system after securing the load, locking the casters, engaging anchors, and confirming the platform rating.
- 3,000-lb capacity supports compatible EV battery packs and drivetrain assemblies.
- 42.75 by 63-inch platform provides broad component support.
- 12V battery power allows mobile operation without a fixed hydraulic connection.
- Twin hydraulic cylinders support vertical platform movement.
- Adjustable screw jacks provide roll, pitch, and yaw alignment.
- Recessed anchor points accommodate modular fixtures, adapters, and restraints.
- Zero-throw casters improve maneuverability in confined service bays.
- Tri-caster locking converts front casters for more efficient straight-line travel.
Load Test Stability Control
No independent proof-load certificate, platform-deflection measurement, hydraulic pressure test, battery endurance report, anchor-strength test, or fail-safe telemetry was supplied. Do not treat 3,000 lbs as a proof load. Uneven loading, unsecured battery packs, unlocked casters, damaged screw jacks, or hydraulic failure can shift the load. Use approved restraints and mechanical support during service.
Service Limits Maintenance
The battery power system, twin cylinders, screw jacks, recessed anchors, remote control, floor locks, and zero-throw casters support mobile EV component handling. This lift table is not verified for personnel lifting, unsecured loads, unstable floors, or components above 3,000 lbs.
- Inspect cylinders, hydraulic lines, platform welds, screw jacks, anchors, and floor locks.
- Check battery charge, remote controls, casters, locking pins, and restraint hardware.
- Keep the platform clean and remove the lift from service after hydraulic drift or structural damage.
Warranty Compliance Contents
BendPak lists a 1-Year Warranty for model 5175611. Package contents identify one scissor lift table with battery. Confirm current warranty terms, charger, remote control, platform accessories, installation guide, inspection documentation, battery specifications, and applicable EV service requirements before commercial use.