Description
Move heavy pallets of turf seed, commercial mower engines, and boxed rotary decks across warehouse floors. The Atlas Lifting and Rigging 6600 Lb pallet jack provides 6600 lbs of hydraulic handling capacity across 20-inch wide forks. This narrow-fork manual pallet truck handles tight skid configurations. It requires smooth concrete surfaces to prevent operator fatigue under full loads.
Formed 10-gauge structural channel steel forms the 48-inch long forks, resisting twist under heavy asymmetric pallet weight. A cast-steel hydraulic pump housing encloses hard-chromed piston rams and high-pressure polyurethane packings. The ergonomic three-position hand control lever routes direct to the lowering valve. Polyurethane-coated steel steer wheels pair with dual front load rollers, rolling smoothly across expansion joints without chipping epoxy floor coatings.
Key Features of Atlas APJW-6600-2048
Landscape supply managers use this narrow pallet jack to haul dense equipment pallets down narrow warehouse aisles. The narrow 20-inch fork width fits custom machinery skids.
- 6600 lb maximum weight capacity moves dense pallets of seed, fertilizer, and machine parts
- Narrow 20-inch overall fork width slides into specialty industrial crates and tight skids
- 48-inch fork length supports full-size equipment shipping skids without platform overhang
- One-piece cast hydraulic pump resists internal pressure leaks under heavy tonnage
- Three-position hand lever selects lift, neutral, and drop functions with positive detents
- Polyurethane wheels and tandem entry rollers roll over floor cracks without gouging concrete
- Reinforced steel push rods transfer lifting force evenly into the front load wheel linkages
Hydraulic Hold Dyno Load Telemetry
Pressure transducers measure 3800 PSI within the hydraulic cylinder block under a full 6600 lb test load. Static hydraulic hold tests demonstrate zero fork drop over an eight-hour warehouse shift. Pull force required to roll the loaded jack measures 62 lbs on level polished concrete. Steering handle torque measures 18 foot-pounds to change directions under maximum tonnage. Hydraulic fluid temperature rise remains under 4 degrees Fahrenheit during repeated pumping cycles.
Warehouse Handling Realities Safety Filters
Slide the forks completely into the skid until the rear carriage bumpers hit the pallet face. Pump the handle using full strokes to elevate the load, then place the control lever into neutral for transport. Do not roll this pallet jack down floor slopes exceeding 5 percent grade when loaded.
- Hydraulic pump reservoir requires ISO 32 anti-wear hydraulic oil inspections every season
- Steer wheel bearings demand fresh EP2 lithium grease via grease zerks monthly
- Under-fork mechanical linkages require pivot pin cleaning to remove dirt buildup
Atlas Pallet Jack Commercial Warranty Details
Atlas Lifting backs this pallet truck with a 2-Year limited warranty on the hydraulic pump and 1-Year on the chassis. The unit ships fully assembled on a skid with an operator manual and parts breakdown list.