Description
Position American Forge Hydraulic Table Cart loads that create repeated manual-handling strain with its 1,100-lb capacity, foot-pedal pump, and 11-to-36-inch lift range. Experienced automotive and industrial technicians gain mobile material handling during repair, assembly, and warehouse work, but can a heavy load remain stable when it is raised off-center? Its steel table-cart construction supports controlled lifting and movement when the floor is stable and the load stays centered.
American Forge model 3904 uses a 32 by 19-1/2-inch table that rises from 11 inches to 36 inches. The foot pedal operates the hydraulic lifting system, while a handle-mounted pressure release controls lowering. The cart weighs 195 lbs and uses two swivel casters with brakes plus two fixed casters. The steel construction supports shop material handling, but hydraulic pressure, cylinder bore, relief-valve setting, platform thickness, and wheel diameter are not specified.
Features of American Forge Cart
Automotive repair shops, manufacturing floors, warehouses, and service departments need a hydraulic table cart for moving heavy components without repeated manual lifting. Trained operators can use this foot-pedal lift cart for compatible loads when the platform, casters, hydraulic system, floor, and rated capacity are checked before use.
- 1,100-lb rated capacity supports compatible engines, transmissions, fixtures, tooling, and shop components.
- 11-inch minimum height allows loading from low pallets, floors, and service surfaces.
- 36-inch maximum height raises material toward benches, platforms, and work areas.
- 32 by 19-1/2-inch table dimensions define the primary material-support surface.
- Foot-pedal hydraulic operation allows manual raising without an electric motor.
- Handle-mounted pressure release provides operator control during table lowering.
- Two swivel casters with brakes and two fixed casters support controlled shop movement.
- Steel construction provides the listed structural material for heavy-duty table-cart handling.
Load Test Hydraulic Control
No independent proof-load result, hydraulic pressure measurement, relief-response test, frame-deflection value, lowering-speed test, or caster-brake telemetry was supplied. Do not treat 1,100 lbs as a proof load. Overloading, side pressure, unstable flooring, hydraulic leakage, shock loading, and off-center placement can affect the cylinder, pump, table, frame, and casters. Stop use if the platform drifts, lowers unevenly, or shows structural damage.
Operation Limits Service
The foot-pedal pump, handle-mounted release, steel table, and braked swivel casters support mobile material positioning in factories, warehouses, offices, and shops. This hydraulic table cart is not verified for personnel lifting, permanent support, uneven surfaces, suspended loads, or loads above 1,100 lbs.
- Inspect the hydraulic cylinder, pump, hoses, release control, and table frame before use.
- Check the platform, casters, brakes, fixed wheels, fasteners, and welds for damage or looseness.
- Keep the load centered and engage caster brakes before raising, lowering, or servicing material.
Warranty Compliance Contents
American Forge product data lists a 1-Year Limited Warranty for model 3904. Package contents identify one hydraulic table cart with foot-pedal operation. Confirm current warranty terms, operator manual, hydraulic specifications, inspection documentation, table dimensions, caster configuration, and applicable workplace requirements before commercial use.