Description
Frequent harness re-strapping and fixed wands slow down contract custodial crews in commercial office complexes. The ProTeam GoFit 6 PLUS 107737 backpack vacuum accelerates workflow by combining an indexed quick-adjust harness with an adjustable telescoping wand and 6-quart canister. It pulls 153 CFM airflow and 91 inches of static water lift. Sucking standing water puddles burns out the motor in seconds.
Canister construction uses impact-grade polyethylene that resists severe fractures from impacts against metal school lockers and door jambs. An 8.5 Amp single-stage flow-through motor operates on dual sealed ball bearings built to repel fine floor grit. Precision-machined aluminum fan impellers maintain high airflow velocity across internal filter layers. Air bypass channels route fresh intake cooling air across the motor armature to dissipate heat during grueling eight-hour night shifts in warm buildings.
Hardware Matrix Operational Specs
The PLUS series indexed harness features numbered adjustment points that give operators custom torso fits within seconds. The telescoping wand adapts reach to tackle high corners or broad floor expanses without posture strain.
- 6-quart micro intercept filter bag traps commercial floor dust without tearing under maximum vacuum.
- Indexed four-point harness system uses numbered adjustment straps for instant custom fitting.
- Telescoping aluminum wand adjusts from 42 to 57 inches without requiring extra extension tubes.
- 14-inch Xover performance floor tool glides over hard flooring and commercial carpets on nylon shoes.
- 50-foot 16-gauge power cable maintains continuous 120-volt current delivery without tripping branch breakers.
- 4-level filtration assembly stops 99.97 percent of particles down to 0.3 microns from escaping.
- 1.5-inch diameter crush-proof hose resists kink formation when dragged around office furniture.
Dyno Thermal Bench Benchmarks
Benchtop load cells measure an 8.4 Amp draw on a dedicated 120-volt test circuit. Motor fan velocity reaches 22400 RPM under standard working airflow restrictions. Motor casing temperature climbs 47 degrees Fahrenheit above ambient room levels after 90 minutes of continuous load. Static vacuum suction holds at 91 inches of water lift on clean filters, dropping to 80 inches as dirt accumulates. Sound output registers 67 dBA at operator head level. Built-in thermal cutoffs interrupt current flow at 205 degrees Fahrenheit during severe airflow blockages.
Field Maintenance Trade Offs
The telescoping wand collar can bind if fine floor grit enters the slide mechanism. Do not deploy this vacuum in commercial kitchens with wet grease spills because moisture will burn out the flow-through motor in seconds. The 6-quart volume requires frequent dumping during heavy commercial tear-outs.
- Disassemble the telescoping wand collar to wipe out abrasive grit twice per month.
- Inspect the secondary cloth filter for thin spots every 40 run hours.
- Check power cord prongs for heat discoloration before plugging into wall receptacles.
Factory Warranty Unboxing Manifest
ProTeam covers the vacuum motor under a 3-Year commercial warranty and includes a lifetime guarantee on molded housing parts. The box contains the 6-quart PLUS vacuum unit, telescoping wand, 14-inch Xover tool, 17-inch crevice tool, 3-inch dust brush, 5-inch upholstery tool, 50-foot cord, and two filter bags.
