Description
Fixed wands force custodians to bend down when sweeping under low office partitions. The ProTeam GoFit 6 107750 6 Qt. backpack vacuum solves back fatigue by combining an adjustable aluminum telescoping wand with an agile 6-quart canister. Motor suction delivers 153 CFM airflow and 91 inches of static lift. Vacuuming damp construction residue will ruin the flow-through motor.
The canister shell uses high-impact polyethylene resin that flexes during door frame collisions to prevent structural cracking. An 8.5 Amp single-stage flow-through motor features precision-ground rotor shafts supported by dual sealed ball bearings. Stamped alloy suction impellers produce high static vacuum across multi-stage filtration chambers. Clean air bypass paths isolate electrical motor windings from heat buildup, venting air downward through acoustic baffles that minimize operating sound.
Hardware Matrix Operational Specs
The telescoping wand pairs with a multi-surface floor tool to cover varied flooring without physical operator strain. Precision-machined adjustment detents ensure the wand stays locked at the chosen length under firm downward scrub force.
- 6-quart dry collection chamber traps commercial sweepings without restricting motor intake velocity.
- 42-inch to 57-inch telescoping aluminum wand adjusts reach without requiring extra extension tubes.
- 14-inch Xover multi-surface tool glides between hard surfaces and commercial carpet without adjustments.
- 50-foot heavy-duty power cable eliminates repetitive outlet moves in long commercial corridors.
- 4-level filtration circuit retains 99.97 percent of dust particles down to 0.3 microns.
- Ergonomic backpack harness anchors unit weight against pelvic bones to protect spinal health.
- 1.5-inch crush-proof vacuum hose flexes without kinking under rapid directional turns.
Dyno Thermal Bench Benchmarks
Electrical amp clamp tests show 8.5 Amps continuous draw under standard 120-volt branch power. The flow-through motor spins at 22400 RPM under typical carpet floor tool drag. Sump casing heat increases 47 degrees Fahrenheit over ambient room baseline during a 90-minute sustained run. Static lift pulls 91 inches of water column on fresh media, dropping to 80 inches when the bag fills. Audio meters record 67.2 dBA at operator ear level. Built-in thermal limiters trip at 208 degrees Fahrenheit during prolonged airflow blockages.
Field Maintenance Trade Offs
Telescoping wand collars can bind if operators drag the tool through fine masonry dust without cleaning the joints. Never assign this unit to crews cleaning standing puddle water or wet restroom tiles because fluid burns out the motor. The 6-quart container fills fast during heavy construction tear-outs.
- Wipe down the telescoping wand slide tube with dry silicone lubricant every 30 days.
- Shake out the micro cloth filter after sweeping fine drywall or masonry dust.
- Inspect the cord plug ground pin before every shift to ensure electrical ground safety.
Factory Warranty Unboxing Manifest
ProTeam covers the vacuum motor with a 3-Year commercial warranty and includes a lifetime guarantee on molded housing parts. The carton contains the 6-quart vacuum unit, telescoping wand, 14-inch Xover tool, 17-inch crevice tool, 3-inch dust brush, 5-inch upholstery tool, 50-foot cord, and two intercept filter bags.