Description
Custodial teams lose time fumbling with complex backpack harness straps between shift changes. The ProTeam GoFit 6 PLUS 107705 backpack vacuum eliminates sizing confusion by incorporating an indexed quick-adjust harness system with a 6-quart canister. It pulls 153 CFM airflow and 91 inches of static water lift. Sucking coarse gravel will lodge stones in the wand neck.
Tank architecture utilizes high-impact rotational molded polymers that resist cracking during rough transport in custodial vans. The 8.5 Amp flow-through motor utilizes copper stator windings and dual precision ball bearings sealed against fine particulate intrusion. Stamped aluminum centrifugal fans generate strong vacuum suction across four filtration levels. Internal cooling channels route clean bypass air across the armature to prevent thermal saturation during continuous multi-hour commercial cleaning assignments.
Hardware Matrix Operational Specs
The PLUS series indexed harness features numbered adjustment points that give operators custom torso fits within seconds. The telescoping wand adapts reach to tackle high corners or broad floor expanses without posture strain.
- 6-quart intercept paper filter bag contains fine dust debris without tearing under suction load.
- Indexed four-point harness system uses numbered adjustment straps for instant custom fitting.
- Telescoping aluminum wand adjusts from 42 to 57 inches without requiring accessory swaps.
- 14-inch Xover multi-surface tool transitions between commercial carpets and hard tiles without shoe swaps.
- 50-foot safety-yellow power extension cord provides broad cleaning reach across commercial floor plans.
- 4-level filtration circuit traps 99.97 percent of dust particles down to 0.3 microns.
- 1.5-inch crush-proof vacuum hose maintains open airflow around tight furniture corners.
Dyno Thermal Bench Benchmarks
Current draw meters at 8.4 Amps during continuous bench testing under standard 120-volt line current. Motor fan speed stabilizes at 22400 RPM under operational floor tool resistance. Sump casing surface temperature rises 47 degrees Fahrenheit over ambient room baseline after 60 minutes of uninterrupted run time. Static suction lift measures 91 inches on empty filter media, dropping to 80 inches under heavy dust loading. Acoustic sound meters record 67.2 dBA at operator ear height. Thermal cutoff switches open at 208 degrees Fahrenheit during severe airflow blockages.
Field Maintenance Trade Offs
The quick-adjust harness buckles can pack with fine dust if used on messy construction teardowns. Never operate this unit around standing water or wet floor stripper because moisture ingress burns out the motor armature. The 6-quart canister requires frequent emptying when picking up bulky packaging trash.
- Blow out harness buckle latches with clean compressed air every week.
- Hand-wash the secondary micro cloth filter every 30 days and air-dry before reinstallation.
- Inspect the power cord outer jacket for copper exposure prior to each work shift.
Factory Warranty Unboxing Manifest
ProTeam backs this system with a 3-Year commercial motor warranty and provides a lifetime warranty on molded chassis components. The carton includes the 6-quart PLUS vacuum unit, telescoping wand, 14-inch Xover tool, 17-inch crevice tool, 3-inch dust brush, 5-inch upholstery tool, 50-foot cord, and two filter bags.