Description
Trailing cords trip laborers and blade flutter causes chipped veneers when sizing pre-finished panels with standard circular saws. The DEWALT TrackSaw Track Clamps 60V MAX cordless track saw kit bundle delivers straight splinter-free panel division via a 60-volt brushless motor and track clamps. Continuous high-feed plunge cuts through thick hardwood slabs deplete single 6.0 Ah batteries within twenty minutes.
A high-performance brushless DC motor mounts inside a rigid aluminum transmission case, driving the 20 mm arbor spindle through precision helical gears that minimize rotational backlash. Dual track-adjustment cams seat inside the magnesium saw base to eliminate lateral carriage slop along guide rails. The parallel plunge mechanism pivots on ground steel pins, maintaining blade perpendicularity across variable depth settings while track clamps anchor guide rails securely to slick sheet goods.
Cordless Track Saw Hardware Metrics
Cabinetmakers dividing high-gloss laminates demand dead-straight score lines without edge chipping along the cut path. Zero-clearance guide tracks establish true blade kerf placement on both sides of the cut.
- 60-volt brushless motor delivers variable speeds from 1750 to 4000 RPM for clean cuts in panels
- 6-1/2-inch carbide blade cuts 2-1/8 inches deep at ninety degrees to clear stacked sheet materials
- Zero-clearance track compatibility holds delicate face veneers flat to prevent surface chip-out
- Continuous anti-kickback mechanism prevents the saw from riding backward along the guide rail
- Track clamps slide into lower rail T-slots to anchor extruded guide rails firmly to slippery sheet goods
- Low-profile flat blade guard permits flush wall trimming as close as 5/8-inch from vertical corners
- 6.0 Ah FLEXVOLT battery pack supplies sustained high-current output through tough composite sheets
Bench Load Telemetry Amperage Draw
Under free-spin rotation at maximum speed, the brushless motor draws 3.2 amps DC from the 60-volt platform. Plunging through three-quarter industrial melamine sheets elevates battery discharge current to 22.8 amps while motor velocity holds at 3650 RPM. Track guide straightness checks register under 0.001 inches across travel spans. Operating sound emissions peak at 85 dBA under high-feed panel sizing loads.
Field Service Trade-Offs Application Filter
Do not use this track saw for rough timber framing or demolition cutting through concrete-embedded lumber. Inexperienced operators who force the plunge head downward before full motor RPM chip carbide teeth on dense composite cores. Wipe aluminum track sliding channels with a clean dry microfiber towel before setting the saw carriage. Replace the rubber splinter guard strip when changing blade kerf widths. Store tracks flat inside protective cases.
Warranty Protection Standard Package Items
A 3-Year limited warranty includes one year of free service and ninety days money back. The bundle contains the 60-volt track saw, track clamps, 6.0 Ah FLEXVOLT battery, rapid charger, 48-tooth carbide blade, blade wrench, and T-LOC storage case.
