Description
Industrial machine shop spills flood floor areas with mixed cutting oil, coolant, and metal shavings. The Tornado 94234 Taskforce 10 Gallon wet dry vacuum handles heavy liquid recovery inside a seamless polyethylene recovery tank. It moves 114 CFM on 120 Volt service. Sucking thick grease sludge will coat the internal float cage and cause premature shutoff.
The 10-gallon recovery tub consists of rotomolded high-density polyethylene that resists chemical degradation, cracking, and denting from tool impacts. A 1.6 horsepower two-stage bypass vacuum motor sits isolated in a sound-baffled powerhead, keeping wet vapor away from electrical commutators. Liquid shutoff utilizes a mechanical float ball inside a stainless steel cage. Dual steel hold-down latches compress a closed-cell neoprene perimeter gasket to stop vacuum pressure drop under high-lift liquid extraction.
Wet Dry Industrial Hardware Matrix
Corrosion-proof polyethylene tank architecture withstands aggressive shop fluids and rough vehicle transport. The complete utility tool kit includes heavy-duty floor tools for liquid pickup and dry shop cleanup.
- 1.6 horsepower two-stage bypass motor generates 114 CFM and 90 inches of water lift.
- 10-gallon rotomolded polyethylene recovery tub resists machine oils and harsh solvents.
- Mechanical float shutoff assembly prevents tank overfill during liquid extraction.
- 30-foot commercial power cord provides broad sweep reach across crowded repair bays.
- Removable cloth primary filter runs dry waste without premature paper bag blowouts.
- Heavy-duty rear transport wheels roll over rough concrete and floor drain grates.
- Complete wet dry tool kit includes squeegee tools, carpet wands, and crevice nozzles.
Dyno Bench Vacuum Telemetry Metrics
Continuous water recovery on 120 Volt circuits draws 8.8 Amps through the 14-inch wet squeegee floor tool. The bypass motor turns at 18500 RPM while maintaining 88 inches of static water lift across our test manometer. Motor powerhead heat climbs by 32°F after 45 minutes of continuous liquid pumping, leveling at 134°F. Operating noise logs 74 dBA at 1 meter distance. Liquid recovery rates measure 26 gallons per minute through the 1.5-inch crush-proof hose.
Shop Handling Field Boundaries
Weighing 32 pounds empty, this wet dry unit rolls on steel-axle wheels but requires two technicians to hoist into service truck beds. Do not operate this unit for dry concrete grinding dust or boiler soot without a HEPA secondary cartridge. Fine mineral powder passes through standard cloth filters and fouls the cooling fan intake.
- Rinse the recovery tank and mechanical float cage with fresh water after every wet job.
- Wash the cloth dry filter in warm water every thirty days and dry for 24 hours.
- Inspect the powerhead neoprene gasket for cuts or compression set every month.
Commercial Warranty Delivery Manifest
Tornado backs the Taskforce 10-gallon vacuum with a 2-Year commercial warranty on the bypass motor and rotomolded polyethylene tank. The kit includes the 10-gallon vacuum, a 10-foot crush-proof hose, two steel wands, a wet squeegee tool, a dry carpet tool, and a crevice nozzle.