Description
Mechanical retrofit crews lose time hauling stationary compressors and untangling rubber air whips across crowded industrial plants. The DEWALT 20V MAX XR BRUSHLESS six-tool combo kit provides mobile cutting, boring, driving, and oscillating capabilities. Motors maintain steady torque. However, compact two-amp-hour battery packs limit runtime under continuous heavy timber sawing passes on circular saws.
Internal inspection reveals case-hardened alloy steel drive shafts, compact planetary gear reduction units, and die-cast aluminum gearcases. The DCS367 reciprocating saw houses a four-position blade clamp driven by an eccentric counterweight mechanism to dampen lateral vibration. Unlike pneumatic wet-ends where phenolic composite rotor vanes degrade from dirty shop air, these brushless motors run sealed rotor bearings that block out fine insulation fibers and wood dust.
Brushless Commercial Fleet Hardware Specs
This six-tool mechanical kit covers commercial plant maintenance, framing cuts, and structural fastener driving. The cordless configuration eliminates compressor transport when servicing overhead equipment decks.
- 820 unit watts out hammer drill powers large spade bits through dense framing lumber without stalling.
- 1/4-inch hex impact driver produces 1825 inch-pounds of torque for rapid conduit bracket mounting.
- 6-1/2-inch circular saw cuts two-by-four timber at 5150 RPM during mechanical staging builds.
- Reciprocating saw delivers a 1-1/8-inch stroke length to sever unistrut channels and schedule forty pipe.
- Oscillating multi-tool head oscillates at 20000 oscillations per minute for flush door casing cuts.
- Planetary gear reduction transmission balances high motor rotation into controlled rotational boring power.
- LED work light produces 110 lumens with a pivoting head to illuminate dark motor control centers.
Bench Dyno Telemetry Load Telemetry
Bench dynamometer tests evaluate this brushless package against equivalent industrial pneumatic tools drawing 5.5 CFM at 90 PSI dynamic under continuous stall. The drill maintains 1450 loaded RPM from a 1750 free speed RPM ceiling, avoiding the fourteen-PSI dynamic line pressure drop of standard 50-foot 3/8-inch air whip lines. The motor avoids the 24-degree Fahrenheit adiabatic exhaust drop that freezes pneumatic tool mufflers. The impact driver generates 1825 inch-pounds of torque, producing an acoustic sound pressure rating of 91 dBA at operator ear level.
Field Service Directives Maintenance Boundaries
This brushless kit accelerates plant maintenance but cannot replace heavy pneumatic production stations. Heavy structural steel fabrication shops should not deploy this package for continuous eight-hour metal grinding because small battery packs overheat and trip thermal protection circuits. Dropping the circular saw onto concrete floors bends the stamped steel shoe.
- Blow airborne metal dust out of motor housing vents with clean shop air after shifts.
- Lubricate the reciprocating saw blade clamp mechanism using light machine oil after pipe cutting.
- Recharge lithium battery packs at moderate room temperature to prevent internal cell damage.
Warranty Terms Package Component Contents
DEWALT backs these tools with a 3-Year limited warranty, one-year free service contract, and ninety-day money-back guarantee. The package contains six brushless tools, two 20V MAX 2.0Ah lithium batteries, charger, circular saw blade, contractor duffel bag, and complete operator technical manuals.
