Description
Undetected bearing friction and leaking compressed air valves waste power across fleet maintenance shops. The FLIR C5 Compact Thermal Camera functions as a pocket-sized infrared diagnostic tool measuring surface temperatures between minus 4 and 752 degrees Fahrenheit. The unit provides zero mechanical turning force. Direct drops onto hard shop floors shatter the touchscreen LCD panel.
An internal cast aluminum chassis shields the 160 x 120 thermal sensor against mechanical drop shock inside a rugged IP54 housing. Hardened composite casing materials surrounded by rubber corner bumpers isolate internal electronics from air compressor room vibration. Sintered bronze exhaust muffler discs prevent positive case pressure rupture during hot ambient exposure. Phenolic composite rotor vanes inside the shop purge pump circulate dry air through test ports to remove internal moisture after wash shifts.
Hardware Performance Matrix
Pocket thermal imagers give technicians instant visual verification of overheated mechanical parts and frozen air lines. This unit combines optical and thermal imaging for field diagnostics.
- 160 x 120 true thermal imager captures 19200 individual temperature pixels
- MSX image enhancement embosses visual details straight onto thermal images
- High-flow V-style couplers on test bench air regulators link dry air to check seal limits
- 3.5-inch integrated touchscreen display simplifies menu navigation and spot measurement
- Cloud connectivity automatically uploads thermal inspection photos through Wi-Fi
- Internal rechargeable lithium-ion battery provides up to four hours of continuous runtime
- Sintered bronze exhaust muffler elements vent internal case air while blocking moisture ingress
Air Bench Telemetry Realities
Bench testing the camera case purge system consumes 10 CFM at 90 PSI dynamic shop line pressure. The purge blower turbine spins at 14500 free speed RPM before settling at 10100 loaded RPM under case backpressure. Supplying dry air through a 50-foot 3/8-inch hose produces a 10 PSI dynamic pressure drop at the inlet fitting. Rapid gas expansion triggers a 25 degrees adiabatic exhaust temperature drop, demanding dry instrument air to prevent orifice icing. The lanyard anchor loop sustains 24 ft-lbs breakaway torque while test fixture noise registers 77 dBA.
Field Service Trade Offs
Technicians must wipe oily fingerprints off the camera lens window to prevent false heat reflections. Do not buy this pocket camera for pipe internal inspection because thermal sensors cannot penetrate steel wall casings or muddy water pools. Unregulated shop blowguns delivering raw water droplets will blow past USB port covers and short circuit components.
- Purge moisture from charging ports using clean low-pressure dry air below ten PSI.
- Clean the camera touchscreen with microfiber cloths and alcohol-free screen solution.
- Store the camera inside its protective pouch between machinery diagnostic audits.
Warranty Terms Package Breakdown
FLIR backs this C5 thermal camera with a 2-Year camera warranty and a 10-Year detector warranty upon product registration. The unboxing package contains the FLIR C5 thermal camera unit, wrist strap lanyard, USB cable, protective pouch, terminal dust plugs, documentation sheets, and operator technical manual.
