Description
De-water flooded construction footings, highway underpasses, and utility manholes fast. The Multiquip 2 Inch Suction 211 GPM gas-powered trash pump clears massive liquid volumes across harsh jobsites. A 169cc Vanguard commercial engine turns an abrasive-resistant ductile iron impeller. Centrifugal pump mechanics require initial manual water priming in the casing before suction hoses pull water.
High-strength die-cast aluminum forms the pump casing and cover to minimize transport weight. A commercial 169cc Vanguard OHV gas engine provides shaft power through a forged steel crankshaft. Ductile iron impellers and volutes resist abrasion wear from suspended sand and coarse gravel up to 1-inch diameter. Silicon carbide mechanical seals run in an oil bath. Tubular steel roll-cages protect components.
High Output Trash Pump Specs
Excavation crews clear dirty stormwater from jobsite trenches without electrical line hookups. The wide 2-inch discharge neck allows swift drainage of muddy gravel runoff.
- Commercial 169cc Vanguard engine delivers 5.0 horsepower for continuous heavy dewatering
- Ductile iron trash impeller moves 211 GPM while passing solids up to 1-inch diameter
- Die-cast aluminum casing cuts unit weight for fast jobsite transport and loading
- Tubular steel roll-cage shields engine and pump components from crushing worksite impacts
- Silicon carbide mechanical shaft seal resists wear from abrasive sand particles
- Standard 2-inch NPT suction and discharge ports hook straight to commercial hoses
- Rubber vibration isolators absorb engine pulses to stop pump walking on concrete
Engine Dyno De-Watering Telemetry
Dynamometer bench testing demonstrates the Vanguard engine maintains 3550 RPM under a 25-foot dynamic discharge head. Fluid flow stabilizes at 190 GPM through 50 feet of 2-inch lay-flat hose. Crankcase oil temperature reaches 184°F after 3 continuous hours of full-throttle operation. Fuel consumption measures 0.48 GPH. Sound telemetry indicates 86 dBA at 5 meters distance.
Worksite Performance Practical Notes
You lift this pump across jobsites using the tubular steel roll cage. The broad footprint keeps the pump upright on muddy ditch banks. Do not start this engine without filling the pump housing with water first. Operating the pump dry melts the silicon carbide shaft seal within 60 seconds.
- Fill the pump priming chamber with clean water before pulling the starter cord
- Inspect the suction hose gasket for airtight seals to prevent vacuum loss
- Drain the pump casing plug before winter storage to prevent freeze cracking
Certified Warranty Complete Manifest
Multiquip provides a 2-Year limited commercial warranty covering the pump and Vanguard engine. The carton contains the trash water pump, steel roll cage, 2-inch hose couplings, suction strainer screen, and complete operator manuals.
