Description
Hand-cranking 200 feet of charged fluid hose drains field crew stamina on busy spray routes. The Reelcraft Electric Motor Driven Hose reel automates line retrieval with a 12-Volt DC electric motor drive. Built to handle 1000 PSI working pressures, this reel manages long-distance commercial spraying. Motor brushes overheat if operators drag charged hose over sharp curbs under continuous motor pull.
Reelcraft fabricates the spool discs and structural uprights from heavy-gauge plate steel with rolled edges to resist drum crushing under tight hose wraps. A 1/3 HP 12-Volt direct-current motor drives the main spool through a steel chain and sprocket reduction drive. The fluid path utilizes a full-flow 1/2-inch NPT machined brass swivel with nitrile packings to withstand 1000 PSI pest control or weed spray mixtures without fluid weeping along the drum axle.
Field Hardware Performance Matrix
Commercial turf rigs and pest spray trucks demand motorized hose retraction to speed up acreage treatment cycles. Heavy-gauge steel fabrication and direct 12-Volt chain drive hardware eliminate manual winding fatigue on long hose runs.
- 12-Volt DC direct-drive motor delivers high torque through a roller chain reduction drive to retrieve 200 feet of hose.
- 1/2-inch female NPT fluid inlet connects to high-volume commercial diaphragm and roller spray pumps.
- Heavy-gauge steel side flanges feature rolled external ribs to prevent metal spreading under tight hose layers.
- Solid brass full-flow swivel joint handles 1000 PSI fluid pressure without creating delivery volume restriction.
- Adjustable spool drag brake eliminates spool overrun and prevents birds-nesting when pulling hose off the truck.
- Unitized steel base frame features pre-punched mounting holes for fast installation onto truck bed side rails.
- Red powder-coat finish protects structural steel from harsh chemical herbicides, fertilizers, and outdoor moisture.
Dyno Load Realities Heat Data
Under continuous spool retraction tests carrying 200 feet of fluid-filled 1/2-inch hose, the 12-Volt motor draws 26 Amps under load. Motor casing temperature climbs to 146°F after 4 consecutive full-length hose retrievals in an 85°F shop bay. Chain tension deflection settles at 0.25 inches under dynamic load. Line retrieval speed clocks in at 4.2 feet per second under full electrical supply. Battery voltage drops under 11.2 Volts cause motor stall when pulling hose uphill through deep turfgrass.
Field Service Application Limits
Weighing 62 pounds bare, securing this steel frame demands grade 8 bolts and steel backing plates on utility truck bodies. Do not connect this reel to high-pressure grease systems or hot pressure washers exceeding 1000 PSI. Pressures above 1000 PSI blow out the internal brass swivel packings and flood electrical motor wiring.
- Lubricate the steel drive chain with dry spray lubricant every 100 operating hours to stop link binding.
- Inspect electrical connection terminals for road salt corrosion every 90 days to prevent voltage drops.
- Check drum axle bearing collar set screws for tightness every 250 hours of road travel.
Commercial Warranty Package Inventory
Reelcraft provides a 2-Year commercial warranty covering manufacturer defects on frame and motor components. The shipping crate holds the EA32112-L12D bare reel unit, a pre-installed 12-Volt DC drive motor, a complete drive chain with guard, a 1/2-inch brass inlet swivel, and an instruction manual with wiring diagrams.