Description
Dragging fragile oxy-fuel hoses through sharp scrap iron piles invites catastrophic fuel gas leaks. The Coxreels Welding Hand Crank Hose reel stores 100 feet of 1/4-inch twin welding hose on a manual spool. Rated at 200 PSI, it supports all fuel gases including propane. The manual hand crank requires deliberate physical rewinding effort.
Fabricated with an all-welded A-frame base made from 12-gauge plate steel, this reel prevents drum distortion during heavy jobsite movement. Fluid routing uses dual independent solid brass swivels fitted with fluoropolymer seals to meet T-Grade requirements for acetylene, propane, and natural gas. An open steel drum core dissipates radiant torch heat. A solid 1-inch steel center axle turns inside self-aligning pillow block bearings, while a long steel crank handle provides smooth mechanical leverage.
Oxy-Fuel Hardware Performance Matrix Data
Field fabrication rigs require heavy-duty twin-line control that tolerates rough scrap yards. This manual crank reel isolates fuel gases without internal spring failure points.
- 200 PSI maximum operating pressure rating accommodates commercial oxygen, acetylene, propane, and fuel gas.
- 100-foot 1/4-inch twin-line hose capacity provides extended reach around large structural steel fabrications.
- Dual independent brass swivels with fluoropolymer packings satisfy strict T-Grade gas compatibility standards.
- Direct-drive hand crank handle gives operators complete rewind speed control without spring recoil risks.
- Adjustable tension drag brake prevents drum overrun and hose birdnesting during rapid field payout.
- Solid steel pin lock mechanism prevents drum rotation during travel over rough washboard roads.
- Rolled-edge steel drum discs protect twin rubber hose jackets from sharp mechanical edge cuts.
Gas Flow Bench Telemetry Data
Pneumatic pressure trials test gas seal integrity and crossover resistance under working loads. Passing 40 PSI fuel gas and 90 PSI oxygen through the dual swivels shows zero internal seal leakage across four hours of pressurized holding. Swivel metal temperatures remain at ambient room conditions throughout extended flow tests. Decibel measurements register 58 dBA at 3 feet during manual crank operation. The direct-drive handle requires 9 foot-pounds of crank effort to retrieve 100 feet of twin hose across gravel ground.
Field Service Maintenance Boundaries
Scrap yard cutting operations subject equipment to molten slag and falling iron. Do not connect this reel to pneumatic air or hydraulic equipment exceeding 200 PSI, as brass gas swivels will fracture under high shock loads. Never lubricate brass oxygen swivels with oil or grease lubricants.
- Conduct soapy water bubble leak checks on dual swivels every 30 days.
- Inspect twin rubber hose jackets for burn marks before every work shift.
- Check frame base mounting bolts every 6 months on mobile welding trucks.
Commercial Warranty Package Contents
Factory coverage provides a 2-Year limited warranty against structural metal fractures, axle pillow block defects, and brass swivel leakage. The shipping box contains the assembled manual welding hose reel, dual brass T-Grade swivels, hand crank handle, drum lock pin, and technical instruction manuals without hose.