Description
Dragging tangled twin air and water lines across heavy manufacturing bays ruins hoses and creates walking hazards. The Coxreels Spring Driven Dual Hose reel stores up to 100 feet of dual 3/8-inch hose at 300 PSI. It handles dual-stream fluid transfer. The dual spool discs warp if wound unevenly under maximum line tension.
Coxreels constructs this dual-line chassis from heavy-gauge carbon steel with dual pedestal support arms and CNC-spun discs with rolled external ribs. The fluid path uses two independent full-flow brass swivels with nitrile seals to isolate fluid lines up to 300 PSI without cross-contamination. A high-capacity cartridge-style tempered steel power spring delivers balanced recoil torque across the entire 100-foot stroke. A non-sparking bronze ratchet pawl locks the spool drum without slipping under vibration.
Field Hardware Performance Matrix
Industrial manufacturing stalls and mobile maintenance skids require dual-line fluid storage that prevents line crossing and twisting. Heavy dual-pedestal steel framing and isolated brass swivels deliver reliable two-stream air and water flow across extensive workspaces.
- Dual-hose drum capacity holds up to 100 feet of 3/8-inch inner diameter paired fluid or pneumatic lines.
- 300 PSI maximum operating pressure rating handles commercial compressed air and low-pressure water systems.
- Dual independent full-flow brass swivels route separate fluid lines together without internal cross-leaks.
- Heavy dual-pedestal 1/4-inch solid steel frame stops drum twist under off-axis line extraction forces.
- Enclosed cartridge spring motor allows safe field servicing without exposing mechanics to loose spring steel.
- Multi-position locking ratchet mechanism holds hose payout at selected lengths to reduce operator arm fatigue.
- Multi-angle four-roller fairlead guides paired dual hoses onto the drum without pinching outer jackets.
Dyno Load Realities Heat Data
Bench pull testing with 100 feet of paired 3/8-inch rubber hose records an initial extraction effort of 11.0 pounds, climbing to 23.0 pounds at full payout. Flow testing reveals a minor 3.2 PSI pressure drop through the dual brass swivels at 40 CFM airflow under 90 PSI supply. The dual brass swivel bodies stabilize at 92°F during continuous water transfer in 75°F ambient air. The internal spring canister completes 10000 consecutive recoil cycles without spring tension loss. Operating noise registers 65 dBA.
Field Service Application Limits
Weighing 62 pounds bare, mounting this dual reel overhead requires structural hoists and four 3/8-inch grade 5 bolts into solid I-beams. Do not use this reel for high-pressure hydraulic circuits, gasoline transfer, or grease dispensing exceeding 300 PSI. Pressures above 300 PSI deform the internal brass swivels and rupture fluid seals.
- Test both brass swivel units for fluid leaks every 250 hours of continuous shop operation.
- Lubricate the guide rollers and ratchet pivot pin with dry aerosol graphite every 6 months.
- Check mounting base fasteners for tightness every 500 equipment hours to counter structural vibration.
Commercial Warranty Package Inventory
Coxreels backs this dual-line hose reel with a 2-Year commercial warranty covering structural frame, spring, and swivel components. The shipment crate contains the bare DLPL-3100 dual hose reel, two pre-installed 300 PSI brass swivels, an adjustable rubber dual-hose stop, and an illustrated installation and maintenance manual.