Description
Standard fertilizer spreaders jam solid on winter sidewalks because coarse rock salt chunks bridge over tiny hopper discharge holes. The Shindaiwa 1.36 Cu-Ft. Rock Salt and Ice Melt Broadcast Spreader dispenses coarse deicing media across commercial walkways without clogging. It holds 1.36 Cubic Feet of salt or calcium chloride. Spreading in windy conditions blows fine salt dust into adjacent shrubs.
A thick-wall poly hopper sits on a rigid 304 stainless steel frame that rejects salt corrosion and stands up to curb impacts. The drive axle features solid stainless steel turning inside sealed bearing cups to isolate moisture and road brine from gear teeth. High-strength commercial gears run inside an enclosed grease-packed housing to prevent salt crust intrusion.
Sidewalk Deicing Broadcast Architecture
A specialized aggressive agitator breaks up damp salt cakes right above the discharge port to maintain continuous gravity feed. The wide wheelbase provides roll stability along narrow shoveled paths.
- 1.36 Cubic Foot hopper capacity holds up to 85 pounds of bulk rock salt, pellets, or calcium flakes.
- All-welded 304 stainless steel chassis prevents rust through harsh winter chemical exposure.
- Enclosed commercial gear drive system shields mechanical drive gears from salt slush contamination.
- Aggressive steel coil agitator crumbles compacted deicer lumps above the gate to prevent bridging.
- Large pneumatic tires roll over packed snow, ice ruts, and concrete joints without skipping.
- Adjustable side pattern deflector shields protect sensitive landscape turf from caustic salt burn.
- Positive-lock rate adjustment lever maintains consistent gate opening through vibration.
Field Handling Drag Bench Telemetry
Pushing this spreader loaded with 80 pounds of rock salt requires 14 pounds of manual effort on packed snow paths. Drive axle gears deliver positive impeller rotation at a 3:1 ratio relative to ground speed. Structural frame deflection measures less than 0.012 inches under full weight load. Impeller throw pattern covers a uniform 10-foot swath at a 3 MPH walk.
Sidewalk Snow Route Fleet Maintenance
Snow removal contractors, university facility crews, and hospital grounds teams clear pedestrian steps and pathways fast with this spreader. Do not fill this spreader with fine construction sand or powdery lime because fine media packs tight around the open agitator. Never leave damp rock salt in the hopper between snow events.
- Rinse the hopper, stainless chassis, and slide gate thoroughly with hot water after every snow event.
- Lubricate the axle bushings and slide gate pivot points with silicone spray every 20 hours of use.
- Inspect the pneumatic tires for proper 20 PSI inflation pressure before every winter storm response.
Warranty Statement Equipment Manifest Inventory
Shindaiwa covers this spreader with a 1-Year commercial warranty covering the stainless steel chassis, drive gears, and poly hopper. The unit ships complete with the hopper assembly, stainless frame, pneumatic wheels, hopper grate, weather cover, and operator guide.