Description
Contractors ruin pickup suspensions when installing oversized commercial V-box spreaders into short-bed half-ton trucks. The Buyers Products Company SaltDogg 0.75 Cubic Yard Electric Black Poly Hopper Spreader matches the payload capacity of standard half-ton and light 3/4-ton pickups. It carries 0.75 Cubic Yards of rock salt. Running dense sand requires an auxiliary vibrator unit.
A seamless double-wall high-density polyethylene hopper resists chemical attack, UV degradation, and loader strikes without cracking. A continuous 5-1/4-inch variable-pitch steel auger sits in a stainless steel trough supported by heavy cast-iron flange bearings. Independent 12 Volt DC high-torque motors run inside weather-sealed polymer housings to isolate electrical armatures from corrosive road brine.
Compact Half Ton Deicing Architecture
This lightweight poly unit delivers professional V-box salt distribution without exceeding half-ton truck rear axle weight limits. The digital in-cab controller gives the driver precision control over salt output and throw pattern.
- 0.75 Cubic Yard poly hopper carries up to 1500 pounds of bulk rock salt and chemical deicing media.
- High-torque 1/2 Horsepower auger motor crushes salt clumps to maintain constant material feed.
- Independent 1/3 Horsepower spinner motor broadcasts deicers in variable patterns from 5 to 30 feet.
- 5-1/4-inch variable-pitch steel auger breaks up clumps and eliminates material bridging in the trough.
- 12-inch heavy polymer spinner disc resists chemical corrosion and stone impact gouging.
- In-cab digital dual-variable controller provides independent dial adjustment of material feed and spread width.
- Heavy steel top screen grates filter out massive foreign debris during loader bucket filling.
Electrical Motor Current Thermal Benchmarks
Operating with a full payload of dry rock salt draws 32 Amps from the truck 12 Volt electrical system at maximum speed setting. The motor housing temperature stabilizes at 124°F after 90 minutes of continuous parking lot treatment. Auger rotation speed holds at 24 RPM under load. Operating acoustic sound registers 62 dBA measured four feet from the rear spinner chute.
Half Ton Truck Fleet Maintenance Directives
Commercial landscapers clearing condo associations, doctor offices, and small business parking lots salt efficiently with this compact unit. Do not run coarse gravel or heavy aggregate sand through this auger unit because stones will wedge inside the auger trough. Never leave moist rock salt inside the poly hopper during warm weather breaks.
- Wash salt residue from around the spinner motor and auger gearbox after every winter weather event.
- Pump synthetic low-temperature grease into the main auger end bearings every 25 hours of operation.
- Inspect high-amperage 12 Volt truck battery connections for corrosion deposits every 30 days.
Commercial Warranty Equipment Shipment Roster
Buyers Products Company backs the SHPE0750 with a 1-Year commercial warranty covering poly hopper structure, electric motors, and in-cab controllers. The shipment contains the 0.75 Cubic Yard poly hopper, variable-pitch auger, spinner chute, in-cab dual controller, top screens, and tie-down straps.