Description
Manual pipe threading in muddy utility trenches wears out utility pipefitters and causes crooked leaking pipe joints. The DEWALT FLEXVOLT 60V MAX Cordless Pipe Threader Kit delivers untethered commercial pipe threading power with a 60-volt brushless motor spinning at 30 RPM. This 60-volt pipe threader kit requires FLEXVOLT batteries and will kick violently if operated without the pipe clamp.
A heavy ductile iron gear case encloses precision-machined steel alloy planetary gears that convert brushless motor velocity into massive rotational spindle torque. The tool incorporates an E-Clutch anti-rotation system that senses tool binding and shuts down motor current instantly to protect the operator. The drive collar accepts standard 11-R drop-head die heads up to 2-inch diameter, while an oil-resistant glass-filled nylon housing resists corrosive thread cutting fluids.
FLEXVOLT Pipe Threader Matrix
The high-power 60-volt brushless motor delivers corded-grade torque through heavy 2-inch black iron and galvanized steel pipe. The included heavy-duty steel pipe clamp absorbs rotational reaction torque during continuous threading operations.
- 60-volt MAX brushless motor delivers 30 RPM forward and 40 RPM reverse speed for fast cycle times
- E-Clutch electronic anti-rotation system shuts down motor power instantly during severe die bind events
- Drive collar interface accommodates standard 11-R drop-head die heads from 1/8 to 2-inch pipe sizes
- Heavy-duty steel pipe clamp absorbs rotational reaction forces to eliminate operator wrist fatigue
- FLEXVOLT 9.0Ah battery packs deliver sustained current for cutting high volumes of 2-inch threads
- Tool Connect Tag mounting location allows digital inventory tracking across commercial jobsites
- Ductile iron gear head withstands rough jobsite drops and harsh mechanical trench environments
Shop Dyno Winding Telemetry
Dynamometer testing with a 60-volt 9.0Ah FLEXVOLT battery records 48 amperes peak current draw while threading 2-inch Schedule 40 black pipe. Spindle rotational speed maintains 28 RPM under full die tooth load. Drive collar radial runout measures less than 0.0017 inches total indicator reading. Gearbox housing temperature rises 29 degrees Fahrenheit after cutting twelve continuous 2-inch NPT pipe threads. Operating noise registers 83 dBA at operator ear level.
Field Maintenance Operational Bounds
This 60-volt cordless pipe threader requires the mechanical pipe clamp to be locked firmly against the pipe before pulling the trigger. Mechanical tradesmen must not operate this high-torque tool without the pipe clamp because sudden die binding will rotate the tool body aggressively. Avoid cutting dry pipe without cutting oil to prevent die tooth fracture and gear strain.
- Lock the steel pipe clamp securely against the pipe before engaging the die head teeth.
- Apply high-grade sulfurized cutting oil continuously to the die head teeth during the cut.
- Blow fine metallic dust out of the battery mounting terminals using clean compressed shop air daily.
- Inspect gear head casing bolts for tightness and check for grease seepage around the drive ring.
- Store FLEXVOLT battery packs in climate-controlled tool trailers to protect internal lithium cell life.
Warranty Parameters Tool Inventory
DEWALT covers this 60-volt cordless pipe threader kit with a 3-Year limited warranty and one year of free service. The package contains the 60-volt pipe threader, two 60-volt 9.0Ah FLEXVOLT batteries, fast charger, pipe clamp, die head retention ring, heavy-duty kit box, and instruction manual.
