Description
Inaccurate rip fences and unstable stands cause dangerous kickbacks when ripping full sheet goods on jobsites. The DEWALT 10in Jobsite Table Saw 32 1/2in Rip Capacity & Rolling Stand delivers massive ripping capacity with a 15-ampere motor spinning at 4800 RPM. This heavy jobsite table saw requires dedicated floor space and cannot transport inside standard vehicle trunks without folding.
A heavy-duty steel tube roll cage encloses the internal motor and trunnion assembly to absorb rough jobsite impacts. Precision rack-and-pinion fence rails mesh with steel gear tracks to maintain parallel fence alignment across massive 32-1/2-inch rip passes. The included rolling stand features heavy tubular steel construction, large heavy-duty wheels, and integrated folding release levers to handle rough jobsite terrain and stairs.
Rolling Table Saw Specifications
A massive 32-1/2-inch rip capacity handles full four-by-eight sheet goods with solid single-operator control. The patented rack and pinion fence system provides smooth micro-adjustments for exact rip cut repeatability.
- 15-ampere high-torque motor delivers 4800 RPM blade speed for smooth crosscuts and rip passes
- Rack and pinion fence system glides on steel tracks to maintain parallel 32-1/2-inch rip capacity
- Heavy-duty rolling stand features large treaded wheels and quick-folding release levers for transit
- Precision-ground aluminum tabletop provides a smooth surface that reduces board feed friction
- Site-Pro modular guarding system allows tool-free adjustments of the riving knife and guard
- Steel roll cage construction shields internal mechanical components from rough jobsite impacts
- Integrated 2-1/2-inch dust port connects to standard vacuum extractors to clear cutting debris
Shop Dyno Arbor Telemetry
Dynamometer testing on a 120-volt 20-amp circuit confirms 14.8-ampere continuous power draw during full-depth rips in 2×8 Southern yellow pine. Arbor rotational speed settles at 4480 RPM from a 4810 RPM free-spin baseline under heavy manual feed. Arbor shaft runout measures less than 0.0012 inches total indicator reading. Motor housing temperature rises 34 degrees Fahrenheit after thirty minutes of continuous ripping. Sound pressure outputs 92 dBA at operator position.
Maintenance Protocols Machine Bounds
This heavy jobsite table saw requires a dedicated 20-amp branch circuit to avoid nuisance breaker trips during motor startup under load. Framing crews should not use light 16-gauge extension cords because voltage drop will overheat universal motor windings. Avoid operating without checking rack and pinion fence lock lever tension to prevent fence slippage.
- Blow fine sawdust from rack and pinion fence gears using dry compressed shop air weekly.
- Wipe the aluminum table surface with dry paste wax to reduce friction and inhibit moisture oxidation.
- Inspect anti-kickback pawl points for sharpness and clear trapped wood chips from the pivot pins.
- Check arbor lock nut torque with supplied wrenches before beginning daily ripping operations.
- Inspect rolling stand tire wear and tighten leg pivot bolts to maintain chassis stability.
Commercial Warranty Bundle Manifest
DEWALT provides a 3-Year limited warranty covering electrical motor windings and structural mechanical components with one year of free service. The bundled package contains the 10-inch jobsite table saw, heavy-duty rolling stand, 10-inch carbide blade, rip fence, miter gauge, push stick, riving knife, wrenches, and manual.
