Description
Align heavy machinery with Atlas Lifting and Rigging ALH lever control when a 9-ton capacity and short 5-foot chain suit compact rigging points. Experienced millwrights and construction crews gain high-capacity positioning during equipment installation, structural fit-up, and plant maintenance, but can a short chain solve access problems without overloading the anchor or hook? Its all-steel body, zinc-coated components, sintered brake, welded stay bolts, high-strength side plates, and overload protection support controlled manual lifting.
Model ALH-090-05-OP lists a 5-foot lift, 19,800-lb maximum load, 104.5-lb assembled weight, 14-inch depth, 8.5-inch width, and 21.5-inch height. Published product fields display 10 tons and 9 tons in different capacity references, while the title identifies 9 tons. Atlas also lists ASTM B30.21 compliance, quick-adjust free-spool operation, blue grease, zinc-coated components, and a 3-Year Limited Warranty. Confirm the nameplate before lifting.
Features of Atlas ALH
Machinery installation, structural steel work, plant maintenance, and tight-access rigging require a compact lever hoist with substantial mechanical advantage. Trained operators can use this ALH model after reconciling capacity data and checking anchor strength, hook engagement, chain alignment, and load balance.
- 9-ton title capacity supports high-capacity industrial positioning.
- 19,800-lb maximum load appears in the product specification.
- 5-foot chain length suits compact rigging locations and short vertical travel.
- Quick-adjust free-spool operation helps position chain before tensioning.
- Overload protection adds a listed control feature.
- Sintered brake construction supports controlled load holding.
- Zinc-coated components help protect selected surfaces during harsh exposure.
- High-strength side plates and welded stay bolts reinforce the hoist body.
Load Test Capacity Control
No independent proof-load result, overload activation test, brake-holding measurement, chain elongation test, hook-throat measurement, or field telemetry was supplied. Published fields conflict between 9 and 10 tons, so do not treat 19,800 lbs as proof load or breaking strength. Confirm the current nameplate before operation and account for side loading, shock loading, corrosion, and poor anchoring.
Rigging Limits Service
The 5-foot chain, manual lever, free-spool adjustment, sintered brake, zinc-coated components, and overload protection support compact industrial load positioning. This hoist is not verified for personnel lifting, operation above the confirmed rating, side-loaded hooks, shock loading, or suspended loads over people.
- Inspect chain links for stretch, twisting, corrosion, cracks, gouges, and deformation.
- Check hooks, latches, brake parts, side plates, stay bolts, and anchor connections.
- Remove the hoist if capacity markings conflict or braking becomes abnormal.
Warranty Compliance Contents
The product listing states a 3-Year Limited Warranty and ASTM B30.21 compliance. Package contents identify the hoist. Verify current warranty terms, nameplate capacity, operator manual, inspection certificate, 5-foot chain, hooks, safety latches, and applicable OSHA requirements before commercial service.