Description
Hoist heavy turf cutting decks, repair parts, and shingles up steep jobsite roof tracks. The Tranzsporter Tranzporter 28′ Platform Hoist with Liftan engine delivers 400 lbs of mechanical lifting capacity across a 28-foot track. This engine-driven platform lift uses an aluminum track ladder frame. The system requires firm, level ground support to maintain ladder stability during lifting operations.
Heavy-duty extruded aluminum ladder sections combine high beam stiffness with low transport weight for easy two-man setup. The Liftan commercial gas engine mounts onto the base frame, driving the cable winch drum through a heavy-duty belt reduction system. A dual-brake system combines mechanical friction pads with an automatic pawl lock, stopping the carriage instantly when the operator releases the hoist control lever.
Key Features of Tranzsporter 60043
Commercial contractors use this 28-foot platform hoist to lift heavy mower decks, generators, and construction tools. The gas engine provides independent power on remote jobsites.
- 400 lb load capacity lifts heavy commercial mower attachments and roofing packs
- 28-foot aluminum ladder track extends reach to second-story roofs and elevated platforms
- Liftan commercial gasoline engine provides high lifting torque without extension cords
- Automatic mechanical safety brake stops carriage drop if drive cable tension slacks
- Foot-pedal control system frees operator hands to guide cargo during loading cycles
- Collapsible steel cargo carriage features fold-down flaps to haul oversized equipment
- Heavy-duty wire rope cable winds evenly across the grooved steel winch drum
Engine Bench Dynamometer Hoist Telemetry
The Liftan commercial engine outputs 4.0 HP under continuous load on our test stands. Hoist line speed clocks 110 FPM under full 400 lb platform load tests. Fuel consumption rates measure 0.35 GPH during active vertical lifting routines. Acoustic output levels measure 84 dBA at the operator control station. Winch brake lock tests verify zero carriage drop when cutting engine throttle abruptly at maximum lifting speed.
Jobsite Setup Controls Safety Guardrails
Set the ladder base at a 75-degree angle against the building structure on solid timber pads. Anchor the top ladder rung to the roof deck using heavy ratchet straps to stop lateral sway. Do not operate this platform hoist during high wind conditions exceeding 25 MPH.
- Engine crankcase requires SAE 10W-30 motor oil changes every 50 run hours
- Wire rope hoist cable requires weekly inspections for broken strands or kinks
- Carriage guide rollers demand dry graphite lubricant to prevent ladder rail binding
Tranzsporter Hoist Warranty Package Manifest
Tie Down Engineering covers this hoist with a 1-Year commercial warranty on the drive engine and aluminum track sections. The package contains the Liftan gas engine, 28-foot track sections, carriage platform, cable assembly, and setup manual.