Description
Shear, bend, and roll sheet metal panels inside cramped shop stalls using a single multi-function machine. The Baileigh SBR-5216 3 in 1 shear brake roll machine handles 16-gauge mild steel across a 52-inch working width. This manual combination unit consolidates three fabrication operations. It requires solid floor anchoring to stabilize manual lever downforce.
Cast-iron side frames provide high structural rigidity, preventing frame deflection during full-width shearing, bending, and rolling passes. The manual guillotine shear station cuts clean edges using reversible high-carbon blades. The press brake station incorporates segmented hardened upper fingers for box and pan forming up to 90 degrees. The initial-pinch slip roll station features three precision ground rolls with wire grooves for rolling round rod stock.
Key Features of Baileigh BA9-1006972
Maintenance shops and metal fabricators use this 3-in-1 machine to shear, brake, and roll replacement sheet metal shields. The combination layout eliminates dedicated machine footprint requirements.
- 52-inch working width handles full four-foot sheet metal stock across all three functions
- 16-gauge mild steel capacity shears, bends, and rolls structural sheet metal and aluminum
- Segmented press brake fingers allow box and pan forming operations on sheet stock
- Manual guillotine shear station cuts clean straight edges without material burrs
- Three-roll slip roller mechanism shapes curved sheet metal cylinders and wire rings
- Dual manual operating handles provide leverage for shearing and bending full-width sheets
- Includes adjustable manual back gauge for repeatable sheet dimensioning across all stations
Combination Machine Bench Test Telemetry
Forming tests confirm clean shearing and 90-degree bending of 16-gauge ASTM A1008 steel sheet across the full 52-inch bed. Manual handle downforce requires 54 lbs of effort during full-width shearing cycles. Slip roll center deflection measures under 0.0015 inches across the 52-inch span under maximum gauge loads. Press brake finger clamp holding force stops sheet slip during 90-degree bend passes. Acoustic sound output registers zero dBA.
Combination Machine Safety Setup Rules
Bolt the machine base tabs securely to a reinforced concrete floor slab before operating manual levers. Keep fingers clear of the rear shear blades and pinch roll points during handle downstrokes. Do not exceed the 16-gauge mild steel rating on any of the three machine stations.
- Shear blade edges require gap clearance checks with a feeler gauge every three months
- Slip roll journal bushings demand drops of ISO 68 machine oil weekly
- Press brake finger clamp linkages require lithium grease application every forty operating hours
Baileigh 3-In-1 Machine Warranty
Baileigh Industrial backs this combination machine with a 1-Year commercial warranty covering castings and mechanical linkages. The shipment includes the SBR-5216 machine, segmented fingers, back gauge, and manual.