Description
Evacuate retention ponds, flooded golf bunkers, and stormwater excavation trenches at high gallon rates. The Honda 4 In. Water Pump Camlock hose kit equips trash pumps with durable suction and discharge lines. This commercial industrial hose package connects straight to four-inch engine-driven centrifugal pumps. It cannot handle petrochemicals, concentrated acids, or volatile solvents.
The green PVC suction hose incorporates a rigid external spiral helix that prevents vacuum collapse under deep negative inlet pressures. Aluminum female Camlock couplers feature stainless steel locking handles and thick nitrile sealing gaskets that block air leaks. The blue PVC lay-flat discharge hose rolls up tight for fast truck storage. It resists UV degradation, puncture tearing, and high hydrostatic head pressures encountered during large municipal dewatering jobs.
Pump Hose Kit Hardware Specifications
Commercial drainage contractors rely on high-volume water pump lines during severe flooding events on commercial turf properties. This hose package delivers unrestricted fluid flow to maximize pump engine efficiency.
- Four-inch internal diameter maintains maximum GPM output on commercial trash pumps
- Aluminum Camlock quick-connect couplings allow tool-free hose connections in seconds
- Rigid PVC suction helix stops hose wall collapse under high vacuum pressure
- 20-foot suction line reaches deep drainage sumps and flooded golf course ponds
- 50-foot lay-flat discharge hose directs water away from sensitive turf areas
- Steel suction strainer stops large stones and branch debris from wrecking pump impellers
- Stainless steel T-bolt clamps secure hose ends against high-pressure blowoffs
Hydrostatic Vacuum Flow Bench Telemetry
Bench testing on a Honda WT40 trash pump shows this four-inch hose kit flows 415 GPM at ten feet total dynamic head. Suction vacuum testing pulls 26 inches of mercury without sidewall deformation or helix separation. Burst testing on the lay-flat discharge line demonstrates an ultimate rupture pressure of 150 PSI at 70 degrees Fahrenheit. Nitrile Camlock gaskets hold airtight vacuum seals across three hours of continuous mud slurry pumping.
Jobsite Operation Dewatering Negative Filter
Operators seat the Camlock fittings square against pump ports and push both locking arms flat against the coupler body. Always secure the steel strainer to the suction hose end. Do not run vehicle tires over the lay-flat discharge hose while pumping water.
- Camlock rubber sealing gaskets require visual inspection for cuts before each pump setup
- Steel suction strainers require hose washdowns to clear mud deposits after every use
- Discharge hoses require complete water draining and roll packing before trailer storage
Warranty Details Package Parts Inventory
Honda covers this commercial hose kit with a 1-Year limited commercial warranty. The shipping bundle contains the 20-foot suction hose, 50-foot lay-flat discharge hose, four-inch aluminum Camlock fittings, round hole suction strainer, and heavy T-bolt hose clamps.
