Description
Join high-pressure HVAC refrigeration copper lines without messy brazing fluxes or explosive oxy-acetylene tanks. The Milwaukee M18 FORCE LOGIC Press tool kit with Streamline ACR jaws presses flame-free refrigerant fittings on commercial air conditioning equipment. This specialized tool joins copper refrigerant lines across rooftop chillers and equipment service bays. It cannot press standard water fittings without swapping jaws.
An advanced brushless motor drives an internal hydraulic pump that produces 7200 pounds of crimping force through forged steel Streamline ACR press jaws. The dual-hinge jaw design wraps around copper refrigeration fittings, creating two 360-degree mechanical seals that withstand operating pressures over 700 PSI. Integrated ONE-KEY wireless technology logs completed press cycles, confirms correct hydraulic calibration, and tracks tool location across jobsites.
Refrigeration Press Tool Hardware Details
Commercial HVAC contractors and equipment refrigeration mechanics require flameless press tools to eliminate fire risks and nitrogen purging during line set repairs. This tool creates high-pressure leak-free joints fast.
- 7200 pounds of hydraulic crimp force compresses heavy Mueller Streamline ACR fittings
- Streamline ACR jaw set includes 1/4-inch, 3/8-inch, 1/2-inch, 5/8-inch, 3/4-inch, and 7/8-inch jaws
- Eliminates open-flame brazing torches, hot work burn permits, and nitrogen flow purging
- Dual-hinge jaw design creates complete 360-degree circular seals around fitting collars
- ONE-KEY wireless tool tracking monitors service history and tool inventory locations
- Balanced inline tool chassis allows one-handed operation from ladders and scaffolding
- REDLINK electronics prevent tool damage from excessive temperature swings on jobsites
Refrigeration Dyno Pressure Bench Telemetry
Hydraulic bench testing measures 7250 pounds of linear force during swaging cycles on 7/8-inch Streamline ACR copper fittings. Complete stroke duration clocks at 4.6 seconds per fitting joint. Helium mass spectrometer testing on pressed ACR joints demonstrates zero leakage up to 700 PSI operating pressure, meeting commercial HVAC burst standards. The internal hydraulic pump pulls 15 Amps under peak swaging resistance.
Refrigeration Line Setup Operating Boundaries
Deburr copper tubing, clean the tube surface with abrasive pads, insert into the ACR fitting, align the jaw groove, and press the trigger until the tool retracts. Do not press uncleaned copper or fittings that sit misaligned inside jaw contours.
- ACR press jaw cavities demand wire-brush cleaning to remove copper burrs before use
- Jaw pivot pins require light machine oil application every fifty press cycles
- Battery receiver blades require dry air blowouts every forty operating hours
Commercial Warranty Case Manifest Details
Milwaukee covers this 2922-22M kit with a 5-Year commercial limited warranty. The heavy transport box contains the M18 FORCE LOGIC press tool, six Streamline ACR press jaws, two M18 RedLithium batteries, charger, and rugged carrying case.
