Description

4-inch spindle travel makes drilling through 4×4 boards easier than ever
Adjust the variable speed anywhere from 280 RPM to 3300 RPM
Digital speed readout displays current RPM of the machine for maximum precision
12-inch by 12-inch cast iron work table pivots up to 45 degrees in both directions
Measures in at 25 by 12 by 63 inches in size with a weight of 154 pounds

Remember when power tools were actually powerful? The WEN 15-Inch Variable Speed Drill Press meets the needs of both home and professional users. This model includes a full four inches of stroke capacity, allowing users to drill through materials up to four inches thick. With such a large spindle travel, drilling holes through a 4×4 board has never been easier. Adjust our variable speed anywhere from 280 to 1000 RPM with the simple turn of a lever, or make a quick belt adjustment for variable speed ranging from 1000 to 3300 RPM. The digital readout reports the current RPM of the machine for increased accuracy when drilling. The 12-inch by 12-inch cast iron table pivots up to 45 degrees in both directions while the laser pointer ensures precise holes. The chuck accepts bits anywhere from 1/12 to 5/8 inches in size. Cast iron frame and base gives the machine a hefty support system to prevent the drill press from walking or vibrating. The WEN 15-Inch Drill Press also includes a lamp to illuminate the work table and convenient onboard storage for the chuck key. This beast measures in at 25 by 12 by 63 inches in size with a weight of 154 pounds. And because it is a WEN product, the WEN 15-inch 8.6 Amp Variable Speed Floor Standing Drill Press comes backed by a 2-year warranty, a stocked inventory of replacement parts, and a friendly and helpful customer service team. Remember when you had the capacity to drill through the thick side of a 2×4 in one smooth stroke? Remember WEN.

Click here to view the product manual

For CA residents, click here for Proposition 65 information