Description
Cleanroom technicians risk catastrophic electrostatic discharge that destroys expensive wafer circuit boards during clean-up procedures. The Atrix VACOMEGASECRH Omega Supreme 1 Gallon cleanroom vacuum stops ESD damage through conductive static-dissipating housing and dual HEPA filtration. It produces 99 CFM airflow and 93 inches of static water lift. Ingesting liquid chemicals will short the motor.
The chassis consists of carbon-impregnated static-dissipative polymer that bleeds electrostatic charges straight to the grounded electrical plug. Inside, a 628-watt commercial motor operates on dual sealed precision ball bearings. A primary certified HEPA filter cartridge traps incoming fine cleanroom contaminants, while a secondary post-motor HEPA cartridge traps motor carbon brush emissions. Conductive internal wiring routes electrostatic charges away from sensitive tooling, preventing voltage arcing across cleanroom workbenches.
Hardware Matrix Operational Specs
Conductive static-dissipating materials prevent electrostatic discharge while dual HEPA filtration protects Class 100 cleanrooms from motor exhaust emissions. All conductive tools connect via positive friction collars to preserve electrical continuity straight to ground.
- Static-dissipating conductive chassis bleeds electrostatic charges straight to building ground.
- Dual HEPA filtration array captures 99.97 percent of microscopic debris down to 0.3 microns.
- Secondary exhaust HEPA cartridge prevents motor carbon brush particulate from escaping.
- 628-watt 1-horsepower commercial motor delivers 93 inches of water lift for cleanroom extraction.
- Conductive 10-foot power cord provides continuous electrical grounding contact.
- Static-safe flexible hose and tools prevent friction-induced static voltage buildup.
- Over-molded toolbox housing stores all conductive wands and nozzles inside the top lid.
Dyno Thermal Bench Benchmarks
Electrical testing meters confirm a 5.2 Amp continuous draw on a 120-volt circuit under dual-HEPA restriction. Motor armature speed registers 21600 RPM under operational cleanroom tool drag. Motor casing surface temperatures rise 39 degrees Fahrenheit over ambient room baseline after 60 minutes of continuous running. Static vacuum suction holds at 93 inches on clean cartridges, dropping to 80 inches when full. Sound output registers 69 dBA at operator height. Built-in thermal cutoffs interrupt current flow at 205 degrees Fahrenheit.
Field Maintenance Trade Offs
The dual-HEPA configuration requires regular replacement of both primary and exhaust filter cartridges to maintain Class 100 cleanroom air certifications. Never use this dry vacuum on chemical solvent puddles or wet solder paste because moisture rots filter membranes and damages motor insulation. Operators must verify grounding continuity with a multimeter.
- Verify chassis ground resistance measures below 1 megohm before cleanroom use.
- Replace the post-motor exhaust HEPA cartridge every 200 operating hours.
- Wipe down the static-safe exterior with cleanroom-approved wipes between shifts.
Factory Warranty Unboxing Manifest
Atrix backs this Omega Supreme cleanroom vacuum with a 3-Year commercial motor warranty and a 1-Year warranty on parts. The package contains the 1-gallon ESD-safe vacuum, conductive hose, gooseneck tool, crevice tool, dusting brush, primary HEPA cartridge, and secondary exhaust HEPA filter.