Description
Short hedge trimmers force workers to lean out over wide decorative hedges, causing uneven wavy cuts and back strain. The Echo eFORCE 34in Single Sided Blade Battery Powered Hedge Trimmer (Bare Tool) provides a massive 34-inch reach to sweep broad hedge crowns flat in single continuous passes. It features a 34-inch single-edge blade. The extended cutter bar places heavy leverage on operator wrists.
A commercial brushless motor mounts inside a die-cast aluminum crankcase that dissipates heat under continuous branch friction. The cutter bar utilizes a rigid extruded aluminum stiffener backbone supporting hardened steel cutting teeth with three sharpened edges per tooth. The front and rear handles incorporate rubber isolation dampers that isolate mechanical cutting vibration from operator arms.
Extended Single Sided Hedge Trimming Platform
Single-direction sweeping action paired with an integrated aluminum debris shield lets operators clear clippings off wide hedges in fluid continuous sweeps. The bare tool integrates straight into existing Echo 56V battery platforms.
- 56 Volt high-torque commercial brushless motor generates rapid blade cycling up to 4600 strokes per minute.
- 34-inch single-sided cutter bar provides expansive single-pass reach across wide commercial hedge tops.
- Full-length aluminum collector sweeper bar clears trimmed foliage off hedge surfaces during forward sweeps.
- Rigid extruded aluminum backbone prevents blade bar flexing across the extended 34-inch length.
- Die-cast aluminum gear case provides thermal conductivity to shed internal mechanical friction heat.
- Three-speed electronic push-button selector matches blade cadence to foliage thickness.
- Bare tool configuration allows commercial operators to utilize existing Echo 56V eFORCE batteries.
Electric Motor Load Bench Telemetry
Shearing wide cedar hedges at 4600 SPM draws 15.2 Amps from a 56 Volt battery pack. Gear case surface temperature levels off at 118°F after 40 minutes of uninterrupted ornamental trimming. The reciprocating blade mechanism draws 460 Watts of continuous electrical power. Operating sound levels register an ultra-quiet 73 dBA at the operator ear.
Estate Pruning Scope Field Protocols
Commercial estate maintenance crews, topiary specialists, and formal garden caretakers sculpt expansive hedges fast using this single-sided bare tool unit. Do not use this single-sided machine for rough brush reclamation or hacking through dead branches thicker than 3/4-inch because teeth will wedge. Never store the unit on damp trailer floors with bare unprotected blades.
- Spray the single-sided blades with resin remover and protective oil after each landscape shift.
- Check blade guide screw torque and adjustment shims every 30 days of active commercial service.
- Blow plant sap and hedge debris from the motor cooling vents after every commercial workday.
Equipment Guarantee Bare Tool Shipment Manifest
Echo protects this eFORCE hedge trimmer with a 2-Year commercial warranty covering the brushless motor and gear case. The bare tool shipment arrives with the 34-inch single-sided hedge trimmer, aluminum sweeper bar, blade scabbard, and instruction manual.
