Description
Double-sided hedge trimmers throw chopped foliage back onto uncut bushes when leveling wide formal privacy hedges. The Stihl HS 82 T-Z 24 Inch 22.7 cc Gas Powered Hedge Trimmer with Muffler features high blade reciprocation to shape formal hedges with billiard-table precision. It features a 24-inch double-sided blade. Sustained wide-open throttle running requires regular air filter checks.
A commercial 22.7 cc 2-MIX engine features a stratified scavenging cylinder design that boosts torque while lowering exhaust emissions. The heavy cutter backbone uses extruded aircraft-grade aluminum to keep the 24-inch bar rigid under load. High-carbon steel cutting teeth are laser-cut and diamond-ground, running against a heavy-duty steel stiffener plate to prevent tooth binding.
Double Sided Commercial Gas Hedge Trimmer
A multi-position rotating rear handle lets operators switch between horizontal hedge tops and vertical side shaping without twisting wrists. The double-reciprocating blades shear foliage in both stroke directions for fast ornamental shaping.
- 22.7 cc commercial 2-MIX engine delivers 1.0 net Horsepower with high high-revving blade speed.
- 24-inch double-sided reciprocating blade shears foliage in both stroke directions for fast shaping.
- High-speed gearbox ratios generate rapid blade reciprocation up to 5000 strokes per minute.
- Rotating multi-position rear handle adjusts to five distinct angles for balanced body ergonomics.
- Laser-cut, precision-ground cutter teeth stay sharp through abrasive dirt and thick branch bark.
- Forward-facing exhaust deflector routes hot gases and smoke away from the operator and foliage.
- Four-point anti-vibration system uses rubber mounts to isolate engine flutter from operator hands.
Engine Bench Telemetry Fuel Consumption
Operating wide-open at 8400 RPM under load, the 22.7 cc engine consumes 0.28 GPH of 50 to 1 pre-mix fuel. The commercial gear case reaches 134°F after 45 minutes of continuous ornamental hedge sweeping. Engine mechanical governor holds engine speed within 180 RPM during heavy branch resistance. Acoustic exhaust noise measures 90 dBA at the operator ear position.
Formal Trimming Application Field Directives
Commercial landscape maintenance contractors and estate arborists pruning geometric hedges produce flat, clean surfaces with this high-speed tool. Do not use this trimmer for rough brush reclamation or hacking through dead branches thicker than 3/4-inch because teeth will bind. Never operate the blade without clearing wire fences from the cutting path.
- Coat cutting blade teeth with resin-dissolving spray lubricant before and after each trimming shift.
- Check blade guide screw torque and adjustment shims every 30 days to maintain crisp cutting shear.
- Clean the commercial felt air filter element every week to maintain correct carburetor airflow.
Commercial Warranty Equipment Shipment Roster
Stihl covers this commercial hedge trimmer with a 2-Year commercial warranty covering the engine block, clutch, and gear drive assembly. The shipping carton contains the HS 82 T-Z hedge trimmer, blade scabbard cover, combo wrench, and operator guide.
