Description
Small shop vacuums choke and lose suction when operators pull heavy sawdust and drywall grit through small 1-1/4-inch hoses. The Shop-Vac 8251205 12 Gallon 5 1/2 Peak HP SVX2 Wet / Dry Utility Vacuum with Tool Kit pulls coarse debris through a wide 2-1/2-inch hose without clogging. It holds 12 Gallons under 5.5 peak HP. Fine drywall dust requires installing a high-efficiency collection bag.
The recovery canister uses thick injection-molded polyethylene reinforced with structural ribs to prevent sidewall collapse under high vacuum pressure. The SVX2 high-output motor features dual-fan airflow engineering to maximize suction velocity while drawing low electrical amperage. Four swiveling caster wheels snap into molded outrigger feet that provide roll stability across rough jobsite debris.
High Airflow Construction Cleanup Platform
An extra-wide 2-1/2-inch hose diameter swallows wood cutoffs, drywall chunks, and water without bridging in the hose throat. The rear blower port converts suction power into a directional blower to clear tools.
- 12 Gallon structural polyethylene canister withstands jobsite impacts and heavy tool drops.
- 5.5 peak Horsepower SVX2 motor generates high-velocity suction to pull gravel, drywall chunks, and water.
- Wide outrigger caster feet provide exceptional rolling stability across rough subfloor surfaces.
- Built-in tank drain plug allows operators to dump liquid waste without lifting heavy tanks.
- Rear blower port converts the vacuum into a powerful directional blower to clear shop benches.
- Lock-on hose connection prevents the vacuum hose from pulling free when dragged across rooms.
- Included cartridge filter captures fine dust down to 1 micron during dry commercial shop cleanups.
Motor Suction Load Bench Telemetry
Pulling continuous dry construction debris draws 10.0 Amps from a standard 120 Volt circuit under steady load. Motor housing surface temperature stabilizes at 126°F after 40 minutes of uninterrupted construction cleanup. The vacuum motor produces 70 inches of waterlift suction at 105 CFM airflow. Operating acoustic sound output measures 73 dBA measured five feet away.
Commercial Construction Maintenance Directives
Drywall contractors, commercial remodelers, and woodworking shops clear heavy renovation debris fast with this poly vacuum. Do not vacuum fine crystalline silica dust without installing an OSHA-compliant high-efficiency cartridge filter. Never use this vacuum without the internal foam sleeve during liquid spill extraction.
- Tap drywall dust out of the pleated cartridge filter over a waste bin after every work shift.
- Rinse the poly tank with water and air-dry after recovering muddy water or drywall paste.
- Inspect the lock-on hose collar for cracked locking tabs every 30 days of jobsite service.
Equipment Guarantee Commercial Delivery Manifest
Shop-Vac covers this commercial wet dry vacuum with a 5-Year commercial warranty covering the SVX2 motor and poly tank. The shipment arrives with the 12 Gallon vacuum, 7-foot lock-on hose, two extension wands, floor nozzle, utility nozzle, crevice tool, and cartridge filter.
