Description
Caustic floor strippers and acidic concrete etching solutions corrode thin metal vacuum drums and ruin electric motors on cheap shop vacuums. The Powr-Flite PF53 15 Gallon Stainless Steel Wet / Dry Vacuum with Toolkit recovers corrosive chemical slurry inside a heavy stainless drum. It holds 15 Gallons of liquid waste. Emptying a full liquid payload requires using the integrated drain hose.
The recovery vessel utilizes commercial 304 stainless steel that rejects caustic rust from chemical floor strippers and muriatic acid wash. Power comes from an industrial bypass vacuum motor that separates cooling air from moisture-laden tank suction air. A heavy-duty tubular steel cart features wide-stance wheels and an integrated tipping pivot to dump dry construction debris.
Heavy Stainless Slurry Recovery Architecture
Massive 15-gallon capacity allows cleaning crews to vacuum extensive warehouse floor pours and flood basements without stopping to dump waste. The complete toolkit handles overhead pipes, floor scrubbing, and narrow crevices.
- 15 Gallon 304 stainless steel recovery tank withstands harsh floor strippers, acids, and metal shavings.
- Commercial bypass vacuum motor generates powerful waterlift suction for deep slurry pickup.
- Flexible rear dump hose enables clean wastewater drainage straight into standard janitorial sinks.
- Heavy-duty tubular steel cart incorporates a tilting drum mechanism for dumping heavy dry rubble.
- Industrial cloth filter assembly traps fine concrete dust during dry warehouse renovation cleanup.
- Complete commercial toolkit includes a 10-foot suction hose, chrome wands, squeegee tool, and crevice tool.
- Large rear transport wheels and front swivel casters navigate across cords, grates, and rough slabs.
Vacuum Motor Suction Bench Telemetry
Continuous wet slurry pickup draws 10.5 Amps from a standard 120 Volt electrical outlet under continuous load. Vacuum motor housing temperature stabilizes at 134°F after 45 minutes of non-stop flood restoration work. Sealed vacuum suction generates 86 inches of waterlift at 100 CFM airflow. Operating sound emissions register 74 dBA measured five feet away.
Industrial Facility Cleaning Field Directives
Building maintenance teams, restoration contractors, and commercial machine shops clean heavy slurry fast with this stainless vacuum. Do not run this vacuum without the liquid float shutoff valve installed to prevent water from reaching the motor fan. Never vacuum hot furnace soot or glowing metal chips.
- Flush the stainless steel drum and dump hose with fresh water after vacuuming caustic chemical strippers.
- Shake concrete dust from the cloth filter and inspect the rubber drum seal gasket every 30 days.
- Wipe down the stainless steel exterior tank with protective oil to prevent surface water spotting.
Factory Guarantee Commercial Shipment Roster
Powr-Flite backs this commercial vacuum with a 5-Year tank warranty and a 1-Year warranty covering the vacuum motor and transport cart. The shipment includes the 15 Gallon stainless vacuum, cart assembly, 10-foot hose, two-piece wand, squeegee floor tool, and crevice nozzle.