Description
Plastic vacuum tanks crack when rolled down rough concrete stairs and degrade under caustic machine coolant exposure. The DeWalt DXV10SB 10 Gallon 5 Peak hp Stainless Steel Wet / Dry Vacuum with Tool Kit and Accessory Storage Bag provides durable slurry containment inside a reinforced metal vessel. It handles 10 Gallons under 5.0 peak HP. Emptying full liquid payloads requires manual tank lifting.
Heavy-gauge 304 stainless steel forms the recovery canister to eliminate chemical corrosion from industrial cutting oils and floor strippers. The 5.0 peak Horsepower motor features dual-ball-bearing construction and high-temperature copper windings to sustain high airflow velocity. Four heavy rubberized swiveling caster wheels snap into outrigger feet that provide roll stability across jobsite electrical cords.
Stainless Steel Cleanup Hardware Matrix
A durable stainless steel canister resists puncture damage from sharp metal shavings and demolition rubble on commercial jobsites. The included accessory storage bag keeps extension wands and floor nozzles organized right on the tank handle.
- 10 Gallon 304 stainless steel tank resists rust from corrosive chemical solutions and industrial coolants.
- 5.0 peak Horsepower motor generates high-velocity suction to lift gravel, metal chips, and water.
- Rubberized swiveling caster wheels glide over framing nails, screws, and concrete expansion joints.
- Durable mesh accessory storage bag mounts to the handle to keep wands and nozzles organized.
- Built-in tank drain port discharges collected wastewater straight into floor drains without tank lifting.
- Rear blower port converts the vacuum into a powerful directional blower to clear shop benches.
- Included washable cartridge filter captures fine dust down to 1 micron during dry sheetrock sanding.
Motor Suction Load Bench Telemetry
Pulling continuous drywall dust and wet aggregate draws 10.5 Amps from a standard 120 Volt circuit under steady load. Motor housing surface temperature stabilizes at 130°F after 40 minutes of non-stop construction cleanup. The vacuum motor produces 70 inches of waterlift suction at 105 CFM airflow. Operating acoustic sound output measures 74 dBA measured five feet away.
Jobsite Renovation Scope Field Protocols
Drywall contractors, framing crews, and commercial remodelers clear jobsite rubble fast with this heavy-duty stainless vacuum. Do not vacuum hot fireplace embers, furnace soot, or flammable solvents because electric motor brush sparks will ignite vapors. Never operate in wet extraction mode without verifying that the mechanical float shutoff moves free.
- Tap concrete dust out of the pleated cartridge filter over a disposal bin after each work shift.
- Flush the stainless steel tank and drain port with clean water after vacuuming wet mortar or slurry.
- Inspect the crushproof hose for cracks or internal clogs every 30 days of active service.
Commercial Warranty Equipment Shipment Roster
DeWalt provides a 3-Year limited commercial warranty covering the vacuum motor, tank housing, and electrical switches. The shipment includes the 10 Gallon stainless vacuum, 7-foot hose, two extension wands, floor nozzle, utility nozzle, crevice tool, cartridge filter, and accessory bag.
