Description
Sucking fine conductive dusts and combustible powders generates friction static that can trigger dangerous electrical sparks. The Nilfisk ATTIX 50 AS/E HEPA eliminates static hazards with grounded chassis construction and certified HEPA filtration driven by a 120V motor pulling 135 CFM. Its 12 Gallon tank lacks an integrated pump-out, making deep floodwater evacuation slow and back-straining.
Heavy-wall polyethylene constructs the 12 Gallon drum, incorporating conductive carbon additives that bleed static electrical charges to ground. An onboard auto-start outlet senses current to run the vacuum in synchronization with connected sanders and grinders. The certified HEPA filter cartridge compresses against a closed-cell gasket to prevent hazardous dust bypass into the turbine. Independent bypass cooling channels route clean ambient air over motor commutators, shielding copper bars from fine carbon and metal dust.
Antistatic Remediation Hardware Matrix
Cleanroom maintenance teams and composite fabricators deploy this vacuum for safe collection of hazardous powders. Total antistatic bonding bleeds static charges away from the operator during prolonged sanding.
- Certified HEPA filter captures 99.97% of toxic dust particles down to 0.3 microns
- Antistatic chassis and conductive hose dissipate static charges to ground to stop spark arcs
- Auto-start power tool outlet syncs vacuum run time with connected electric sanders and saws
- 12 Gallon polyethylene container provides expanded capacity for large facility cleanups
- 120V commercial motor produces 135 CFM and 92-inch water lift for deep machine sump recovery
- Push-and-Clean reverse air pulse system clears caked dust from filter media on demand
- Full commercial tool kit includes conductive hose, stainless extension tubes, and floor tools
Dyno Thermal Bench Telemetry
Continuous load testing on 120 Volt service registers a 9.2 Amp motor draw without auxiliary tools active. Motor housing temperatures increase by 37°F over room ambient after 50 minutes of continuous dust collection. Exhaust port air discharge stabilizes at 117°F under high-resistance suction cycles. Static water lift drops 7-inch water lift through a standard 13-foot conductive hose. Sound meters record a quiet 59 dBA at 10 feet under open airflow, climbing to 64 dBA under full seal.
Operational Limits Field Protocol
The 25-pound dry weight rolls over rough shop slabs with ease, but lifting a filled 110-pound wet container onto truck beds requires two workers. Emergency flood restoration teams should avoid this unit, because the large basin lacks an internal discharge pump for continuous draining. Sucking ungrounded plastic pellets through non-conductive vinyl hoses will defeat the antistatic system and generate static discharges.
- Check antistatic ground continuity across the chassis using an ohmmeter once per month
- Inspect the HEPA filter cartridge sealing ring once per week for dust tracking leaks
- Depress the Push-and-Clean button three times at each work pause to clear the filter face
Factory Warranty Carton Contents
Nilfisk provides a 2-Year commercial warranty covering motor, electronics, and antistatic grounding paths. Unboxing delivers the 12 Gallon antistatic vacuum, certified HEPA filter, 13-foot conductive hose, stainless extension wands, commercial floor nozzle, crevice tool, power tool adapter, and fleece dust bag.