Description
Toxic lead abatement and industrial facility decontamination demand absolute containment without structural canister degradation. The Nilfisk Eliminator Pro II 12 Gallon wet dry vacuum meets critical containment standards through multi-stage certified HEPA filtration pulling 110 CFM and 105-inch water lift. The manual filter shaker requires physical effort, interrupting remediation sweeps when fine dust cakes the pre-filter.
Chrome-plated steel tank construction resists corrosive sanitizing chemicals, abrasive lead paint chips, and sharp metal debris. The multi-stage filtration train places a certified downstream HEPA filter behind an oversized main cloth filter to stop particulate blow-through. Independent bypass motor cooling paths route clean ambient air across copper commutators, preventing carbon brush erosion from conductive dusts. Heavy toggle clamps apply continuous downforce on rubber head gaskets to prevent hazardous exhaust leaks.
Critical Remediation Hardware Matrix
Environmental remediation contractors deploy this unit for toxic dust containment in schools, hospitals, and industrial plants. Heavy-duty steel components prevent structural punctures from sharp demolition scrap.
- Certified downstream HEPA filter captures 99.97% of toxic dust particles down to 0.3 microns
- 12 Gallon chrome-plated steel collection drum resists chemical corrosion and puncture damage
- Industrial 120V bypass motor produces 105-inch static water lift for deep crevice decontamination
- Manual external filter shaker mechanism frees compacted dust cakes without opening the canister
- Multi-stage filtration includes main cloth filter and micro-prefilter for HEPA membrane protection
- Chrome steel push handle and industrial rear wheels navigate rough remediation jobsites
- 7-Piece commercial tool package provides crushproof hose, metal extension wands, and floor tools
Dyno Thermal Bench Telemetry
Amperage registers 10.5 Amps on 120 Volt service under loaded suction against a closed test orifice. Motor housing temperatures climb 40°F over ambient after 45 minutes of heavy dust extraction. Cooling air exhaust vents at 119°F during sustained closed-inlet vacuum pulls. Static water lift drops 8-inch water lift across a standard 10-foot commercial hose. Sound output meters track 66 dBA at 10 feet under open airflow, climbing to 71 dBA under full vacuum seal.
Abatement Limits Maintenance Directives
The balanced steel frame rolls true across bare subfloors, but lifting a filled 100-pound liquid load to pour into containment drums strains two operators. Disaster recovery outfits handling high-volume basement flood pumping must pass on this model, as the basin lacks an internal discharge pump. Sucking smoldering debris or hot furnace soot will burn through the cloth pre-filter and destroy the HEPA element.
- Shake the manual filter handle five times at each work pause to drop caked dust
- Inspect the HEPA filter cartridge seal once per week for dust trails that indicate bypass
- Empty hazardous materials into approved containment bags before the tank exceeds half capacity
Commercial Warranty Carton Manifest
Nilfisk protects this machine with a 2-Year commercial warranty covering motor and electrical components. The unboxed container delivers the Eliminator Pro II vacuum, certified HEPA filter, main cloth filter, 10-foot hose, two metal extension wands, floor squeegee, dust brush, and crevice tool.
