Description
Combustible dust environments and toxic abatement require static dissipation alongside certified HEPA filtration. The Nilfisk ATTIX 19 AS/E HEPA delivers antistatic grounding and cleanroom-grade filtration powered by an industrial 120V motor pulling 140 CFM and 105-inch water lift. The 19 Gallon stainless tank lacks an internal pump-out, making heavy liquid recovery slow and taxing on operator backs.
Heavy-gauge 304 stainless steel forms the 19 Gallon canister, resisting chemical corrosion while providing structural rigidity for grounding paths. Antistatic conductive construction bleeds triboelectric charges to ground, preventing static spark discharge around combustible dusts. The certified HEPA filter sits inside an airtight aluminum housing that prevents air bypass under maximum vacuum pull. Dual-stage motor turbines pull independent cooling air across windings, isolating the motor armature from abrasive industrial particulates.
Antistatic Abatement Hardware Matrix
Cleanroom technicians and industrial plant mechanics operate this machine to recover fine conductive dusts without ignition risk. Complete antistatic bonding prevents electrostatic charges from accumulating across the chassis.
- Certified HEPA filtration system captures 99.97% of toxic dust particles down to 0.3 microns
- Antistatic chassis construction grounds the entire system to prevent hazardous electrical discharges
- 19 Gallon 304 stainless steel canister provides chemical resistance and structural durability
- Auto-start tool socket matches vacuum motor operation to connected electric hand tools
- 140 CFM industrial motor produces 105-inch water lift for deep machine sump evacuation
- Heavy-duty steel transport cart features large non-marking rear wheels for industrial slab transit
- Complete tool kit includes conductive hose, stainless extension tubes, and industrial floor nozzles
Dyno Thermal Bench Telemetry
The motor draws 11.2 Amps on 120 Volt service under full vacuum drag against a closed test orifice. Motor housing metal temperatures elevate 42°F above ambient after 50 minutes of loaded extraction. Cooling exhaust air vents at 121°F under high-resistance suction cycles. Vacuum loss measures 7-inch water lift through a 13-foot conductive hose run. Sound pressure meters record 59 dBA at 10 feet under open airflow, reaching 64 dBA under high-vacuum resistance.
Usage Restrictions Field Upkeep
The heavy steel push cart navigates factory aisles with stability, yet tilting the loaded 180-pound tank to drain fluids strains shop workers. Do not purchase this system for continuous flood evacuation because lack of an internal pump stalls work during dump cycles. Sucking ungrounded plastic shavings through non-conductive hoses will generate dangerous static arcs that bypass the chassis ground.
- Check the antistatic ground continuity wire with an ohmmeter before every hazardous dust extraction
- Inspect the HEPA filter seal ring once per month for dust tracking that indicates seal compromise
- Wipe down internal stainless steel tank surfaces with neutral cleaners to preserve corrosion resistance
Warranty Specifications Package Manifest
Nilfisk covers this machine with a 2-Year commercial warranty on motor, electrical switches, and antistatic components. The package contains the 19 Gallon stainless vacuum, certified HEPA filter, steel transport cart, antistatic suction hose, stainless wands, industrial floor tool, and crevice nozzle.