Description
Field technicians destroy sensitive electronics when using high-static plastic shop vacs to clean server racks and circuit boards. The MetroVac MDV-1BA Datavac Pro Series handheld canister vacuum eliminates electrostatic discharge through an all-steel grounded housing and micro-detailing attachments. It produces 65 CFM airflow and 60 inches of water lift. Inhaling liquid will short the motor.
The body consists of stamped 20-gauge all-steel construction finished in high-durability baked enamel that resists mechanical denting. Inside, a 500-watt 0.75-horsepower motor operates on precision ball bearings balanced to reduce vibration during bench use. A high-velocity suction fan draws air through a sealed micro-pore filter bag. The grounded 3-wire electrical circuit drains static electricity straight into the building ground, preventing high-voltage electrostatic charges from jumping to sensitive computer chips and circuit board traces.
Hardware Matrix Operational Specs
All-steel grounded construction dissipates static electricity to protect delicate electronics during bench cleaning. The specialized micro-detailing kit reaches inside tight server chassis, mainframe enclosures, and laboratory test instruments where standard vacuum tools cannot fit.
- 500-watt 0.75-horsepower commercial motor delivers 65 CFM airflow for precise dust extraction.
- All-steel grounded canister chassis eliminates static electric shock hazards around computer motherboards.
- 5-piece micro-detailing tool kit reaches between electronic components and keyboard switches.
- 19-inch flexible suction hose bends into server rack cabinets without kinking under negative pressure.
- Disposable micro-filtration paper bags capture toner dust and microscopic debris down to 0.3 microns.
- 12-foot heavy-duty 3-conductor grounded power cord provides reliable electrical ground contact.
- Dual-function blower adapter converts vacuum exhaust into a focused air blaster for dust displacement.
Dyno Thermal Bench Benchmarks
Electrical test bench meters record a 4.2 Amp continuous draw on a 120-volt power feed under full tool restriction. Motor velocity tops out at 24000 RPM in open suction mode. Steel canister surface temperatures rise 38 degrees Fahrenheit over ambient room baseline during a 45-minute continuous run. Static suction lift holds at 60 inches of water lift on clean bags, dropping to 50 inches when filled. Sound meters register 72 dBA at 3 feet from the steel canister. Built-in thermal limiters trip at 205 degrees Fahrenheit during air blockages.
Field Maintenance Trade Offs
The compact steel canister lacks capacity for large floor sweeping assignments, limiting this unit to electronics and bench detailing. Never use this machine for wet extraction or post-construction drywall cleanup because moisture will short the unsealed motor and fine plaster ruins the paper filter. The steel shell gets warm to the touch during prolonged continuous use.
- Inspect the 3-prong grounded power plug before connecting to sensitive electronic workstations.
- Replace the paper filter bag when fine toner dust reaches two-thirds capacity to protect airflow.
- Wipe the steel canister body with a clean dry cloth to prevent conductive grit buildup.
Factory Warranty Unboxing Manifest
MetroVac covers the Datavac Pro Series with a 5-Year commercial motor warranty and a 1-Year warranty on parts and housing. The package contains the all-steel handheld vacuum, 19-inch flexible hose, crevice tool, dusting brush, 5-piece micro-detailing tool kit, shoulder strap, blower nozzle, 12-foot grounded cord, and two disposable filter bags.